Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 8:35 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: H17 rudders holes
PostPosted: Thu Feb 17, 2005 11:20 am 
Offline
Site Rank - Deck Hand

Joined: Tue Dec 23, 2003 10:44 am
Posts: 3
Location: O'Fallon, IL
I purchased a couple of used rudders (excellent condition) which were used on a H16. I can see where the H17 holes should be but want to be as percise a possible.

Is there a template I can use do ensure the holes are exactly where they should be? What size should the holes be?

Thanks,
Joe


Top
 Profile  
 
 Post subject:
PostPosted: Thu Feb 17, 2005 11:31 am 
Offline
Site Rank - Captain

Joined: Mon Oct 11, 2004 12:24 am
Posts: 143
Location: Edmond Oklahoma
Go to the top of this screen click on support. Go to sailboats click look for rudders there you have it :D

I would sugest you read in open fourm the thread on rudders. Its agood idea if you know of anyone with a good template on there boat to use them just a thought good luck :lol:

Todd


Top
 Profile  
 
 Post subject: rudder template
PostPosted: Mon Feb 21, 2005 11:30 am 
Offline
Site Rank - Deck Hand

Joined: Tue Dec 23, 2003 10:44 am
Posts: 3
Location: O'Fallon, IL
Todd,
Thank you for the information. I downloaded both versions of the template but the deminsions don't match. The length should be 9 3/8" and width 6 3/8" but the printed version is not even 9" wide.
I printed both in portrait and landscape with no change.

How do you get the correct size template?

Joe


Top
 Profile  
 
 Post subject: Template size
PostPosted: Mon Feb 21, 2005 11:37 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15026
Location: Oceanside, California
Template size...

The size it prints will depend on your system. The scale is there on the template so you can reduce or enlarge to get it right. A lot of printer settings (properties) allow for scaling. You can also use a photo copies to scale.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group