Hobie Forums http://www.hobie.com/forums/ |
|
Jib Furler Maintenance http://www.hobie.com/forums/viewtopic.php?f=15&t=24212 |
Page 1 of 1 |
Author: | send4help [ Thu May 06, 2010 5:05 am ] |
Post subject: | Jib Furler Maintenance |
I am replacing the standing rigging, and a few other things, on my H17 Sport . I remember reading on one of the threads about maintenance on the jib furler, which was designed not only to keep it working smoothly, but the replacement of the part that can break under stress. I've done a search for this information and can't find it. I seem to recall a video of someone rebuilding the furler, with a bunch of ball bearings on a table top. I see a furler part on the H17 part sheet, costs about 250$. Is there a less expensive, rebuild option, what is it, and can you help me find the link? Thanks, Dan L |
Author: | mmiller [ Thu May 06, 2010 8:37 am ] |
Post subject: | Re: Jib Furler Maintenance |
Parts breakdown for the Hobie furler are on the Hobie 18 page. |
Author: | fastcat [ Thu May 06, 2010 1:18 pm ] |
Post subject: | Re: Jib Furler Maintenance |
During your rebuild check the outer SS casing for cracks (especially at the bends), I had one fail and was demasted last year. My boat is a 2000, so it wasn't that old. |
Author: | send4help [ Thu May 06, 2010 6:54 pm ] |
Post subject: | Re: Jib Furler Maintenance |
fastcat wrote: During your rebuild check the outer SS casing for cracks (especially at the bends), I had one fail and was demasted last year. My boat is a 2000, so it wasn't that old. Yeah, that's what I remember. Is that part replaceable separately, or does one have to replace the entire furler assembly? thanks, d |
Author: | Sail Revolution [ Sat May 08, 2010 11:07 am ] |
Post subject: | Re: Jib Furler Maintenance |
send4help wrote: fastcat wrote: During your rebuild check the outer SS casing for cracks (especially at the bends), I had one fail and was demasted last year. My boat is a 2000, so it wasn't that old. Yeah, that's what I remember. Is that part replaceable separately, or does one have to replace the entire furler assembly? thanks, d [youtube]http://www.youtube.com/watch?v=OhrzlrgVEBk[/youtube] |
Author: | fastcat [ Wed May 12, 2010 7:48 am ] |
Post subject: | Re: Jib Furler Maintenance |
Yes, you can buy the furler yoke (part # 61980000) along with most of the other furler parts separately. A breakdown of the furler assembly is shown in the parts guide for the H18 http://www.hobiecat.com/sailing/part_diagrams.html |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |