Hobie Forums http://www.hobie.com/forums/ |
|
Is this fatal? Cracking parts on my hull http://www.hobie.com/forums/viewtopic.php?f=15&t=25764 |
Page 2 of 2 |
Author: | send4help [ Thu Jun 03, 2010 6:06 pm ] |
Post subject: | Re: Is this fatal? Cracking parts on my hull |
Took the starboard hull off today. Only took that one off, due to logistics. Here's what I found...two loose screws, and one screw almost totally unscrewed this is the aft endcap...the one with the most exterior glass damage... http://s736.photobucket.com/albums/xx10 ... ap2.jpg%26 and this next one is forward-starboard endcap, exactly as I found it...I don't know why this one would be loose... http://s736.photobucket.com/albums/xx10 ... ap1.jpg%26 |
Author: | widerisbetter [ Sun Jun 06, 2010 1:27 pm ] |
Post subject: | Re: Is this fatal? Cracking parts on my hull |
after reviewing send4help's photos of the end caps being loose I decided to dis-assemble my 17. Good thing. Only one of the 4 end caps was actually screwed down tight. I was able to move the other three from an 1/8 to almost 1/4 inch. All the screws were loose. (yeah, mine too ) I removed the screws and shot a little two part semi-flexible epoxy into the holes and re-mounted the end caps. Now I will reassemble and find something else that needs fixing PS - thanks Dan! |
Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |