Return to Hobie.com

Hobie Forums

It is currently Wed Oct 17, 2018 2:10 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: hobie 14 year and msrp ?
PostPosted: Thu May 17, 2018 7:36 am 
Offline
Site Rank - Captain

Joined: Wed May 16, 2018 6:59 pm
Posts: 26
Hello I have a H14 that has been in the family for years
trying to get it back on the water
For registration need to figure out what year it was built and cost new
hull #1726 sail #1658
Pre march 71 since higher sail # are listed on march 71 news letter ?
Here https://cdn.hobiecat.com/digital_assets ... 971_03.pdf
so 68-70 ??

Thanks

_________________
H14
H16
H18
H18


Top
 Profile  
 
PostPosted: Sat May 19, 2018 2:06 pm 
Offline
Site Rank - Captain

Joined: Mon Sep 15, 2014 12:34 pm
Posts: 147
Location: Hartland, WI
your guess is as good as you'll get for the year.
As far as cost, states only ask that so you'll pay tax on it. Don't know why you'd be willing to pay taxes twice on the same boat.

_________________
JKK
83 yellow/ white decks Hobie 14 Corando turbo
82 yellow hulls Hobie 16 Cat Fever
84 yellow hulls hobie 16 Yellow Nationals
plus a few extras that I'm restoring


Top
 Profile  
 
PostPosted: Sat May 19, 2018 3:10 pm 
Offline
Site Rank - Captain

Joined: Wed May 16, 2018 6:59 pm
Posts: 26
Thanks for the reply
As for cost new they have annual tax/ lake fee on cost new vs age
I don't want to have to pay any more than I have to years ago sailboats were exempt just like any non motorized boat
any idea ? New in 1970 500$? 5k$ ?
wouldn't think it would be near the 5k since chevelle in 70 was only 3300$ ?
here are the fees https://www.in.gov/bmv/2495.htm

_________________
H14
H16
H18
H18


Last edited by in812 on Sun May 20, 2018 9:49 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sat May 19, 2018 11:09 pm 
Offline
Site Rank - Captain

Joined: Mon Sep 15, 2014 12:34 pm
Posts: 147
Location: Hartland, WI
I've heard that the 1st 16s were around 1,000 in 1970. I would think 14s would be less.

_________________
JKK
83 yellow/ white decks Hobie 14 Corando turbo
82 yellow hulls Hobie 16 Cat Fever
84 yellow hulls hobie 16 Yellow Nationals
plus a few extras that I'm restoring


Top
 Profile  
 
PostPosted: Sun May 20, 2018 9:48 am 
Offline
Site Rank - Captain

Joined: Wed May 16, 2018 6:59 pm
Posts: 26
Thanks

_________________
H14
H16
H18
H18


Top
 Profile  
 
PostPosted: Sat Jun 23, 2018 8:08 pm 
Offline
Site Rank - Captain

Joined: Wed May 16, 2018 6:59 pm
Posts: 26
I'm going to start on some soft spot repairs looking for advise
what I have read west system is the #1 choice ?
105 resin 205 hardner and 404 filler
substituting 206 slow hardener to give more pot life/work time
will this affect the strength of the repair ?
some people say use screws to pull the laminations back together after injecting epoxy then remove and fill them
does it help , hurt or not needed ?
read where some use bent paper clip to hollow out the foam under the holes to get more surface area to bond the layers ?
again does it help , hurt or not needed ?

Thanks

_________________
H14
H16
H18
H18


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group