I would love to put the reacher set up on my turbo 14, but i dont know where to start. Could anyone help. How hard is it to install? where could i find all the rigging new or used?
| Hobie Forums http://www.hobie.com/forums/ |
|
| hobie 14 hooter http://www.hobie.com/forums/viewtopic.php?f=17&t=11504 |
Page 1 of 1 |
| Author: | jctj123 [ Sun Jan 04, 2009 6:59 pm ] |
| Post subject: | hobie 14 hooter |
I would love to put the reacher set up on my turbo 14, but i dont know where to start. Could anyone help. How hard is it to install? where could i find all the rigging new or used?
|
|
| Author: | H14Turbo [ Wed Jan 07, 2009 9:55 am ] |
| Post subject: | |
I have put at hooter on my 14, if you would like some photos of the setup I have used, give me your email, I can send you some. If you need some advice I can help you. |
|
| Author: | jctj123 [ Wed Jan 07, 2009 11:43 am ] |
| Post subject: | |
yah definintly my email is [email protected]. Can u tell me where did u get all the parts also how much did u spent and how much more of an advantage is it compared to just a jib, also can u use the hooter with the jib. |
|
| Author: | J_Eaton [ Wed Jan 07, 2009 11:49 am ] |
| Post subject: | |
http://www.catsailor.com/Hooter.html |
|
| Author: | jctj123 [ Wed Jan 07, 2009 8:43 pm ] |
| Post subject: | |
yah i read that article sounds like a great idea for my turbo 14 now i need the parts and an idea of setting it up and a price lol 
|
|
| Author: | J_Eaton [ Wed Jan 07, 2009 8:53 pm ] |
| Post subject: | |
in the last paragraph of the article is a link to the onlinestore for pricing the remainder of the document is assembly instructions |
|
| Author: | jctj123 [ Thu Jan 08, 2009 6:21 pm ] |
| Post subject: | |
now i just have to do it!! haha
|
|
| Author: | klango [ Sat Oct 24, 2009 8:45 pm ] |
| Post subject: | Re: hobie 14 hooter |
could you send me pics, too? [email protected] tks. |
|
| Author: | Dan Berger [ Wed Oct 28, 2009 11:41 am ] |
| Post subject: | Re: hobie 14 hooter |
I have a complete set up I am selling. Pictures are here: http://www.thebeachcats.com/index.php?m ... emId=17781 It is the sail without the face on it--the one on the black trim boat. You can have a hardly used sail, Harken furler, 2 piece Carbon spin pole, mast tang/pulley, halyard, Hooter sheet, frame rail reinforcements, and freshly rebuilt Oxen blocks. Basically, you would have to drill one hole in the frame for the pole mount, drill 4 holes to rivet the mast tang on, drill 2 holes in the deck lips for the reinforcements, connect everything and you are done. Dan [email protected] |
|
| Author: | Dan Berger [ Wed Oct 28, 2009 12:06 pm ] |
| Post subject: | Re: hobie 14 hooter |
One more thing on my kit--The sail was designed specifically for a Hobie 14 and was built by Whirlwind sails. It is the Kevlar laminate sail. I'm asking $1500 for the complete kit. Dan |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|