| Hobie Forums http://www.hobie.com/forums/ |
|
| Where to buy the H14 Turbo dolphin striker WIRE ?? http://www.hobie.com/forums/viewtopic.php?f=17&t=12381 |
Page 1 of 1 |
| Author: | RobPatt [ Sat May 02, 2009 6:18 pm ] |
| Post subject: | Where to buy the H14 Turbo dolphin striker WIRE ?? |
Hi... one of the forks on my dolphin striker wire rusted through and broke... this is the 3d season for it, which really surprised me... I put ALL new rigging and it all still looks great, except for this item... Anyway... where do I buy JUST the wire? It's already a turbo so I don't need the kit? Didn't see at Murray's . com and ... the part number shows as a rod in the manual, but mine is a wire. Help! Turbo turbo.... LUV how this little boat just hauls butt...!! Thanks much! -Rob H14T H18SX |
|
| Author: | gary eudy [ Sun May 03, 2009 1:35 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
I made one for my 14T with a hand swagging tool You can call Murrays Marine and they will make one for you if you do not have tool |
|
| Author: | turbofan [ Thu Jul 16, 2009 5:12 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
I think the wire ones were an aftermarket kit, but I think Murrays would be a good bet! |
|
| Author: | Windburn [ Fri Jul 17, 2009 6:29 am ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
On the striker post, is there a difference between the 16 and a 14 striker? ThANKS. |
|
| Author: | mmiller [ Fri Jul 17, 2009 3:48 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
For the "wire" striker there have been a few variations. Murrays had sold a different one than Hobie's I believe. That one had a "captured" wire that had to be made on the casting. Hobie's is slotted allowing wire replacement. We do offer a replacement wire with end fittings # 11170000 (its in the catalog numerical section). The production H14 Turbo strikers were stainless rod like the H16 but shorter. |
|
| Author: | gary eudy [ Fri Jul 17, 2009 6:29 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
Try west marine |
|
| Author: | Dan Berger [ Tue Aug 25, 2009 10:50 am ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
I have just the wire if you haven't found or made one yet. Hit me off line at danberger at mindspring dot com Dan. |
|
| Author: | ''THE LITTLE DEVIL'' [ Thu Jun 03, 2010 11:38 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
hey ive got a really old h14 (some one said maybe 1973)and i thought it had been converted to a turbo because it has all the stuff but its dolphin striker is the stainless steel model that only come with the production made turboswhich started to be made 1980's ish im confused 
|
|
| Author: | ''THE LITTLE DEVIL'' [ Thu Jun 03, 2010 11:40 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
by the way the number on the rear right pylon is 2347 |
|
| Author: | MBounds [ Fri Jun 04, 2010 5:46 pm ] |
| Post subject: | Re: Where to buy the H14 Turbo dolphin striker WIRE ?? |
''THE LITTLE DEVIL'' wrote: hey ive got a really old h14 (some one said maybe 1973)and i thought it had been converted to a turbo because it has all the stuff but its dolphin striker is the stainless steel model that only come with the production made turboswhich started to be made 1980's ish im confused It may not be the original front crossbar, or It may be a retrofit (it's not that hard - I did one on my 14). |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|