Hobie Forums http://www.hobie.com/forums/ |
|
tack clew plate-set question http://www.hobie.com/forums/viewtopic.php?f=17&t=237 |
Page 1 of 1 |
Author: | h2obie [ Wed Jul 02, 2003 9:24 am ] |
Post subject: | tack clew plate-set question |
what kind of tool do I use to fasten this? It is similar to a rivet w/o the pin that pulls a rivet tight. |
Author: | mmiller [ Thu Jul 10, 2003 11:10 am ] |
Post subject: | Tack place rivet |
This is a rivet like used in the old iron construction days. It is a solid pin with a head. Clamp the plates to the sail (very tight). Insert the rivet and place the head down against a solid surface (vise). Tap the other end of the rivet with a hammer to flair , flatten and tighten the connection. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |