Hobie Forums http://www.hobie.com/forums/ |
|
Turbo upgrade http://www.hobie.com/forums/viewtopic.php?f=17&t=32299 |
Page 1 of 1 |
Author: | Lakewateree [ Sun Sep 26, 2010 12:20 pm ] |
Post subject: | Turbo upgrade |
I have an 85 14 and have been thinking about upgrading it to a turbo. The kits are pretty expensive new, are there used turbo kits out there? |
Author: | sullivar [ Sun Sep 26, 2010 4:52 pm ] |
Post subject: | Re: Turbo upgrade |
I have a complete turbo kit and an aftermarket dolphin striker kit (both used) that I would consider selling for $350. Sullivar |
Author: | Lakewateree [ Sun Sep 26, 2010 4:55 pm ] |
Post subject: | Re: Turbo upgrade |
What all does the turbo kit contain? My 14 already has the dolphin striker on it. |
Author: | J_Eaton [ Sun Sep 26, 2010 7:10 pm ] |
Post subject: | Re: Turbo upgrade |
I've got a "kit" with everything, less the jib sail and dolphin striker which includes: Upper forestay w/swivel Jib furling assembly Bridles Jib blocks w/sheet and shackles Jib block support wire |
Author: | DaveW70 [ Sun Sep 26, 2010 7:41 pm ] |
Post subject: | Re: Turbo upgrade |
This describes the turbo setup pretty well but strangely it doesn't mention the dolphin striker which is a necessary prerequisite. http://2010.archive.hobiecat.com/suppor ... rbojib.pdf Dave W |
Author: | Lakewateree [ Sun Sep 26, 2010 9:32 pm ] |
Post subject: | Re: Turbo upgrade |
Would you be interested in selling j_eaton and how much if so? |
Author: | sullivar [ Mon Sep 27, 2010 8:45 am ] |
Post subject: | Re: Turbo upgrade |
My kit has: Upper forestay w/swivel Jib furling assembly Bridle wires Trapeze wires Trapeze adjustment lines and rope locks Trapeze dogbones Trapeze shockcord Jib blocks w/sheet and shackles Jib block support wire Dolphin striker kit (seperate kit if buying new) $350 for the above I also have a used but workable Hobie jib that has had a repair for an additional $80 Cheers, Sullivar |
Author: | brainvision [ Mon Apr 27, 2020 8:31 pm ] |
Post subject: | Re: Turbo upgrade |
ISO need of a complete 14 turbo set up. Need jib sheet furler all complete set up. Please message me with prices and contact information. Thank you |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |