Hobie Forums http://www.hobie.com/forums/ |
|
H14T mast stepping with jib http://www.hobie.com/forums/viewtopic.php?f=17&t=34923 |
Page 1 of 1 |
Author: | Ploux79 [ Mon Apr 11, 2011 5:26 pm ] |
Post subject: | H14T mast stepping with jib |
I have the furler system and was curious how other sailers step the mast with the sail wrapped around the forestay on a windy day when I step the mast it sometimes becomes unfurled before I can connect the forestay to the furler what I have come up with is to put a jib snorkel over the jib before stepping the mast then removing it after I get everything set so I can unfurl the jib, attach the jib sheets to the jib then pull the string on the furler to refurl the jib so I can put the boat in the water and raise the main. There has to be an easier way, I doubt everyone sailing a 14T has a cover for the jib, especially if they trailer it and are removing the sails, so I'm asking how everyone else does it Thanks in advance for your responses |
Author: | 56kz2slow [ Mon Apr 11, 2011 5:34 pm ] |
Post subject: | Re: H14T mast stepping with jib |
Put a bungie cord in the clew around the jib and back in the clew. On my friends Getaway, there is a loop on the sail a few inches fom the clew that the snap hook on the clew can snap in. |
Author: | xnomad [ Thu Apr 14, 2011 5:39 pm ] |
Post subject: | Re: H14T mast stepping with jib |
The jib I bought arrived tied together using bits of sail cloth as a ribbon. I just use one of those ribbons and it holds it together nicely. A piece of string would do it too. |
Author: | hawk592 [ Thu Apr 14, 2011 7:34 pm ] |
Post subject: | Re: H14T mast stepping with jib |
I use a bungie clew to clew and it works great to keep it all together till I'm all set up to launch. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |