Same post as used on the 16.
11" over all length 9/16-18 for 13/32"
Easiest to add the cast aluminum version if you don't have one on the boat.
z145.jpg)
80200010
DOLPHIN STRIKER KIT H14
US$ 104.00 (1/2017)
| Hobie Forums http://www.hobie.com/forums/ |
|
| Dolphin striker post specs http://www.hobie.com/forums/viewtopic.php?f=17&t=59685 |
Page 1 of 1 |
| Author: | leoxyz [ Mon Dec 26, 2016 5:12 pm ] |
| Post subject: | Dolphin striker post specs |
Does anybody know the length of the H14 turbo DS post? I found the diameter (9/16"), but not the length of the whole post nor the length of the threaded section. Thanks in advance Leo |
|
| Author: | mmiller [ Mon Jan 02, 2017 9:57 am ] |
| Post subject: | Re: Dolphin striker post specs |
Same post as used on the 16. 11" over all length 9/16-18 for 13/32" Easiest to add the cast aluminum version if you don't have one on the boat. 80200010 DOLPHIN STRIKER KIT H14 US$ 104.00 (1/2017) |
|
| Author: | leoxyz [ Fri Jan 12, 2018 9:22 am ] |
| Post subject: | Re: Dolphin striker post specs |
I just used an old DS from a cannibalized HC 16. Very late thanks Leone |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|