Return to Hobie.com
Hobie Forums
It is currently Mon May 25, 2020 3:58 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Hobie Bob Hardware
PostPosted: Wed May 13, 2020 1:52 pm 
Offline
Site Rank - Admiral

Joined: Thu Aug 18, 2005 9:15 pm
Posts: 215
Location: Sacramento, Ca
Matt M. I recently acquired a Hobie Bob 30113, however it didn't come with any of the mounting hardware, rivets, washers or lock ring. It did come with the aluminum pole. Any chance I could order these parts still from you guys? If not, any idea on the sizes of the eye straps and the long rivet?

Thank you,

Adam


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Wed May 13, 2020 4:25 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 13418
Location: Oceanside, California
You can order from a dealer. There is the kit of parts 30118:

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Wed May 13, 2020 4:43 pm 
Offline
Site Rank - Admiral

Joined: Thu Aug 18, 2005 9:15 pm
Posts: 215
Location: Sacramento, Ca
Wonderful, thank you so much.


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Thu May 14, 2020 10:32 am 
Offline
Site Rank - Admiral

Joined: Thu Aug 18, 2005 9:15 pm
Posts: 215
Location: Sacramento, Ca
Is this still available, I don't see this available on your website.

Thank you,

Adam


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Thu May 14, 2020 11:36 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 13418
Location: Oceanside, California
Not so minor detail! Sorry!

"WHERE USED" --> Description Qty
8003291 PVC PIPE 3/4 X 10' SCH. 40 0
8010121 RIVET POP 3/16x5/8 PH-SS 2ea
8010141 RIVET 3/16 x 3/4" PH-AL 1ea
8010181 RIVET POP 3/16x1/4 PH-SS (ABA) 4ea
8011291 RIVET CAP 15/64 SS 3ea
8080711 WASHER 5/8x1-5/16 SS 2ea
36600031 BEARING 5/8 X 1-3/8 X 7/16 2ea
36600040 COTTER RING 1-1/8 X .072 1ea
H137 EYESTRAP-LRG SS 2ea


PVC can be sourced and cut to length... just spaces the float above the mast head.

We have all the rest in stock it appears.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Thu May 14, 2020 4:33 pm 
Offline
Site Rank - Admiral

Joined: Thu Aug 18, 2005 9:15 pm
Posts: 215
Location: Sacramento, Ca
Matt,

I'm installing this on a H18SX.

Can you clarify, why are there 7 pop rivets, but only 5 holes to drill? Also is there a reason to drill into the casting at the top of the mast as shown on the installation instructions vs just putting them in on the upper part of the mast but below the casting? Also is there a reason why the long rivet is aluminum vs stainless steel?

Thank you so much for all of your help,

Adam


Top
 Profile  
 
 Post subject: Re: Hobie Bob Hardware
PostPosted: Thu May 14, 2020 4:48 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 13418
Location: Oceanside, California
Rivets are best into the aluminum for strength.

Long aluminum simply holds the rod vertically in the eye straps.

I don't recall the number of rivets other than in an aluminum mast... the shorter would be used in all four eye strap locations.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group