Hobie Forums
http://www.hobie.com/forums/

Patching little dings
http://www.hobie.com/forums/viewtopic.php?f=20&t=26894
Page 1 of 1

Author:  Paris [ Sun Jun 27, 2010 10:56 am ]
Post subject:  Patching little dings

I have a few little dings to the hulls that do not appear to go through the fiberglass, but only the coating. What is the best material to patch these with? I'd like to color match it (powder blue) if possible, too.

Pulling the boat up and down the beach, and over pebbles, slowly eats away at the "keels" of the hulls. What is the best approach with these?

Thanks!

Author:  widerisbetter [ Sun Jun 27, 2010 9:40 pm ]
Post subject:  Re: Patching little dings

Paris - do some research on this forum under "repairs" and etc. Small dings might be best repaired with an Evercoat Gel Coat repair kit from West Marine. Check out http://www.westmarine.com. I just got done repairing a couple major dings with the fiberglass repair and the gel coat repair kit. Don't forget your dust masks and beer.

Author:  ericdeko411 [ Tue Jun 29, 2010 12:06 am ]
Post subject:  Re: Patching little dings

widerisbetter wrote:
Paris - do some research on this forum under "repairs" and etc. Small dings might be best repaired with an Evercoat Gel Coat repair kit from West Marine. Check out http://www.westmarine.com. I just got done repairing a couple major dings with the fiberglass repair and the gel coat repair kit. Don't forget your dust masks and beer.



Link is not opening. :(

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/