The hull plug thread is also what is used on our small kayak drain plugs.
79050211 DRAIN PLUG - 3/8" W O-RING&KEEPER
z5.jpg)
Cockpit plugs were basically a rubber cork. You can drill a hole through them to run a keeper line though.
| Hobie Forums http://www.hobie.com/forums/ |
|
| Hobie Holder 12 drain plugs http://www.hobie.com/forums/viewtopic.php?f=20&t=50168 |
Page 1 of 1 |
| Author: | bobg [ Tue Jan 07, 2014 7:13 pm ] |
| Post subject: | Hobie Holder 12 drain plugs |
looking for a source for the 2 stern drain plugs. thanks |
|
| Author: | Jbernier [ Wed Jan 08, 2014 11:55 am ] |
| Post subject: | Re: Hobie Holder 12 drain plugs |
The drain plugs for the hull are same as H20 - and still available from any dealer - not sure about the cockpit drains - those are showing discontinued so you might need to make one: http://static.hobiecat.com/digital_assets/holder-12-parts-guide.pdf |
|
| Author: | bobg [ Thu Jan 09, 2014 5:27 pm ] |
| Post subject: | Re: Hobie Holder 12 drain plugs |
great. thank you very much. |
|
| Author: | mmiller [ Fri Jan 10, 2014 12:30 pm ] |
| Post subject: | Re: Hobie Holder 12 drain plugs |
The hull plug thread is also what is used on our small kayak drain plugs. 79050211 DRAIN PLUG - 3/8" W O-RING&KEEPER Cockpit plugs were basically a rubber cork. You can drill a hole through them to run a keeper line though. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|