Return to Hobie.com
Hobie Forums
It is currently Wed Oct 09, 2024 10:34 pm

All times are UTC - 8 hours [ DST ]




Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 
Author Message
PostPosted: Fri Sep 26, 2014 3:16 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15075
Location: Oceanside, California
Improved CT Seat Retention Clip

Image

The new side release buckle has a number of advantages over the keyhole. Most importantly, it is harder to miss and easier to use than the red clip. It is very clear that the two halves of the buckle connect to each other, and safe to say that nearly everyone is familiar with this type of buckle.

In an effort to reduce seats coming loose on the water and the chance of losing a seat in a capsize, all replacement seats from the Parts Department will be shipping with the new buckles.

We will also be offering a seat/kayak update kit free of charge for users who would like to install the new system into their kayaks.

Please request update kits via warranty through your dealer.

84507822 – VANTAGE CT SEAT CLIP UPGRADE

Vantage CT Seat Update Video:






--------------OLDER VERSION ------------------

In the event of a capsize, Vantage style seats can come loose from the hull if not properly tethered. All Vantage style seats are secured into a kayak by a safety tether located at the aft center of the seat. This tether prohibits the seat from rotating to the unlock (removal / install) position.

The Hobie® Vantage CT Seat uses a simple locking part, but its proper use is essential. Failure to "snap" the part onto the eyelet post can result in the seat rotating to the unlocked position and possible loss.

Hobie CT Seat features and function video:


Seat tether on the CT Seat

Image

Image

Place over the eyelet post

Image

ESSENTIAL!

Pull up to "snap" the clip in place.

Image


-----------------PRO ANGLER ST/XT SEAT----------------

Hobie Vantage ST (PA 12 / 14) and Vantage XT (PA 17T) use a webbing strap, which is locked in place on the seat frame by a stainless clip on a shock cord.

Image

Hobie Vantage ST / XT Seat features and functions video:

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic This topic is locked, you cannot edit posts or make further replies.  [ 1 post ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group