Return to

Hobie Forums

It is currently Wed Jan 17, 2018 6:12 pm

All times are UTC - 8 hours [ DST ]

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Jan 03, 2006 6:31 pm 
Site Rank - Deck Hand

Joined: Fri Aug 19, 2005 6:38 am
Posts: 12
Location: Philadelphia area
I have a 2004 with cracks around the starboard hull where the rear cross member exits the hull. I have sent pics to the dealer and Hobie will be sending a new hull for replacement. My question is: What causes this to happen? I bought this boat as a leftover right out of the box from a dealer. One thing that impressed me was the hulls. No need to paint, easy maintenence etc. I have only sailed the boat 4 times and the hull has cracked. This leaves me a little concerned.

On the left hull I also noticed on the middle/main cross member sleeve that the sleeve itself seems to have shifted inboard inside the hull about 1/4 inch or so. Is this something that can be fixed? Are these sleeves supposed to be glued/secured into place?

Durability????? :?

 Post subject: Getaway Hulls
PostPosted: Wed Jan 04, 2006 10:02 am 
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12054
Location: Oceanside, California
We have the replacement hull in process. The boats defective hull was made in December 2003.

The hulls are molded of two types of plastic. The outer skin is cross linked polyethelene. We have found some problems occur when the cross link material is under-cooked. This is likely in this hull. Perhaps it was the first hull made on a cold day that December.

The sleeves are molded in as a part of the boat. The sleeve has not slipped in. Rather, the hull mold is expanding over time. The molds are cast aluminum and after hundreds and hundreds of times in the oven they can get a little distorted. We revise the sleeves length from time to time to match the hulls change in shape.

Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group