Hobie Forums
http://www.hobie.com/forums/

front tramp fiberglass rod
http://www.hobie.com/forums/viewtopic.php?f=23&t=48901
Page 1 of 1

Author:  grizzou [ Wed Aug 14, 2013 1:29 am ]
Post subject:  front tramp fiberglass rod

Hello!

I buy a used Getaway and I'm really happy with it.

However, there is no fron tramp on it. So I command one, but I'll also need the front fiberglass rod for it.

Did anyone can give me the size of the rod (lenght and width).

Thanks

Author:  mmiller [ Wed Aug 14, 2013 9:12 am ]
Post subject:  Re: front tramp fiberglass rod

Part #37880001 68" Length / 3/8" (.375) Diameter

Author:  grizzou [ Fri Aug 16, 2013 6:16 pm ]
Post subject:  Re: front tramp fiberglass rod

Thanks Matt

Author:  iowadivers [ Sun Sep 08, 2013 5:06 pm ]
Post subject:  Re: front tramp fiberglass rod

i'm doing the same thing... the rod I pulled out of my boat is really weather worn and flakes of fiberglass came off all over my arms making for a very uncomfortable evening (still scratching/itching)... do you have to use a replacement fiberglass rod? Could you use something else to save on cost?

Matt

Author:  iowadivers [ Sun Sep 15, 2013 7:45 am ]
Post subject:  Re: front tramp fiberglass rod

I found a 10' section of fiberglass rod 3/8" on graingers website for $10... Under $20 total with shipping vs $50 total cost to buy the hobie produced version.... I will cut to size and install and post my results... Should arrive later this week

Author:  grizzou [ Sun Sep 15, 2013 8:37 am ]
Post subject:  Re: front tramp fiberglass rod

I finally decide to go to an industrial fiberglass shop neer my home town. Well I finally realise that I know the guy. So it was suppose to cost me 5$ and at the end it close for a big 0$.

The thing to remember... try to find a little business neer you. Sometime the cost will be less then the normal sailing store price :-)

Envoyé depuis mon MZ604 avec Tapatalk 4

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/