Return to Hobie.com

Hobie Forums

It is currently Sat Sep 23, 2017 12:13 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 66 posts ]  Go to page Previous  1, 2, 3, 4, 5
Author Message
PostPosted: Sat May 13, 2017 6:16 am 
Offline
Site Rank - Admiral

Joined: Mon Oct 26, 2009 10:27 am
Posts: 199
Location: Cheshire, CT USA
Not sure what the 17 rear crossbar looks like. I utilized the slot in the back of the rear crossbar on my getaway as a support. I'm sure you could modify my design to make it work for you.

_________________
2002 Getaway
"Cheshire Cat"


Used parts for sale. All original from 2002 Getaway. All showing their age but functional. Just pay shipping.
- Main and jib ---- SOLD.
- Main trampoline
- Wing seat covers
- shrouds


Top
 Profile  
 
PostPosted: Thu Aug 03, 2017 11:31 am 
Offline
Site Rank - Admiral

Joined: Mon Oct 26, 2009 10:27 am
Posts: 199
Location: Cheshire, CT USA
Updated first post with all the pictures that got lost in the great photobucket debacle of 2017:

Photo bucket screwed everyone that used their site for 3rd party picture hosting therefore all my photos have disappeared. I've cleaned up this thread so that all my info on the motor mount is in the first post with a link to all the photos in one folder.

_________________
2002 Getaway
"Cheshire Cat"


Used parts for sale. All original from 2002 Getaway. All showing their age but functional. Just pay shipping.
- Main and jib ---- SOLD.
- Main trampoline
- Wing seat covers
- shrouds


Top
 Profile  
 
PostPosted: Tue Aug 29, 2017 12:46 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Aug 13, 2016 8:19 am
Posts: 8
Updated my old post, just wanted folks to see the final product which I am very happy with.

PJW wrote:
I am trying a different approach for an electric motor mount for my Hobie Getaway. I was determined not to drill any holes in the rear cross beam and not interfere with the sliding truck of the rear winch. I used a piece of 1x4 by eight foot six inch long wood to provide support and to counteract downward/forward thrust from the motor. The wood goes all the way to the front beam and fits under some tramp lashings. It all tucks nicely under the tiller bar which provides about one foot space between it and the rear beam when the rudders are down. When the rudders are up, there is less space but the tiller bar is higher and does not interfere with the motor. The electric motor I have bought has a head that is about 8" wide and will fit onto the 1 x 4. That way the motor will hang parallel to the back beam when not in use and swing down when needed. With the rudders up it goes about 10 kph on max, faster than walking speed. See attached pictures.

Image

Image

Image

Image

Image

Image

Image


Last edited by PJW on Thu Aug 31, 2017 9:55 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Aug 29, 2017 1:46 pm 
Offline
Site Rank - Old Salt

Joined: Mon Dec 22, 2008 7:02 pm
Posts: 385
Location: Rockford, IL
Here's my motor mount with a Home Depot fence rail for a cross brace. I shimmed it so the cross brace didn't interfere with the rudders.
Image

_________________
Yet another Bob!
"Firefly" - 2012 Hobie Getaway with wings and spinnaker


Top
 Profile  
 
PostPosted: Mon Sep 04, 2017 4:14 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Apr 03, 2011 11:56 am
Posts: 12
I am assembling Keith's motor mount for use with my Torqeedo 1003 on the Getaway. I guessed wrong on the hardware for the mount, and thought I'd add the list of bolts, nuts, and washers I finally ended up with to save somebody else a couple of trips back to the hardware store. All bolts, nuts, and washers are 5/16 inch diameter by 18 threads per inch. Dimensions listed below are length, except for the set screw.

3" hex head bolts (2) for attaching top plate to crossbar
2 1/2" hex head bolts (2) to hold top plate, main support, and bottom plate together
3/4" carriage bolts (4) to hold the side covers to the main support (2 each)*
3/4" carriage bolts (3) to hold the L-shaped parts to the main support (1 each)*
1" carriage bolts (4) to hold the wood motor bracket to the L-shaped parts (2 to the vertical L and 1 each to the horizontal Ls)
Acorn nuts (15)
Flat washers (30)
Split lock washers (15)
1/4" diameter X 1/2" long set screw to hold the bottom plate in the crossbar

Notes:
* Our local hardware stores here around Cleveland, Ohio do not care stainless steel carriage bolts shorter than 1". I ordered the 3/4" bolts from BoltDepot.com.

I sail mostly in fresh water (Lake Erie), but I towed my boat to Chesapeake Bay once and may try other coastal locations after retiring. To be safe, I bought all stainless hardware

It looks like Keith only used flat washers in a few locations. I bought more because washers spread the loads, and lock washers slow down or stop loosening due to vibrations. Also, they are cheap. Use your own judgement on where and how many.

_________________
Don
Strongsville (near Cleveland) OH
Lake Erie sailor, mostly
2010 Getaway "Happy Couple"


Top
 Profile  
 
PostPosted: Tue Sep 05, 2017 8:49 am 
Offline
Site Rank - Admiral

Joined: Mon Oct 26, 2009 10:27 am
Posts: 199
Location: Cheshire, CT USA
Thanks dpalac. Good luck with your new motor mount. Hope it works as well for you as it has so far (2 seasons) for me. I am adding your hardware count into my original post.

Keith

_________________
2002 Getaway
"Cheshire Cat"


Used parts for sale. All original from 2002 Getaway. All showing their age but functional. Just pay shipping.
- Main and jib ---- SOLD.
- Main trampoline
- Wing seat covers
- shrouds


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 66 posts ]  Go to page Previous  1, 2, 3, 4, 5

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group