Return to Hobie.com

Hobie Forums

It is currently Wed Jul 18, 2018 5:16 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Rudder cams and pins
PostPosted: Sun Apr 08, 2018 1:36 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Apr 08, 2018 1:26 pm
Posts: 4
I was replacing the port rudder can and it seems that the replacement pin and or screws sent is too short; so we cracked the casting. Now I need to order the casting and CORRECT pin. Can anyone advise the right part number. Our dealer is pretty much a kayak dealer and doesn’t know much about the getaway. I’m in Costa Rica and a fried is coming down so I’m hoping to get the parts to him ASAP


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Sun Apr 08, 2018 4:53 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12365
Location: Oceanside, California
There are two kits for cam replacement. One for the casting you have and the other for H14 and 16s. Likely you have gotten the H14/16 version in error. You should have gotten 5204 RUDDER CAM KIT H17/18/20 (Getaway too).

50322001 RUDDER CASTING LWR BLACK

Comes with a cam installed.

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Sun Apr 08, 2018 6:31 pm 
Offline
Site Rank - Old Salt

Joined: Sat Nov 06, 2010 8:10 am
Posts: 687
Location: Satellite Beach, FL
mmiller wrote:
There are two kits for cam replacement. One for the casting you have and the other for H14 and 16s. Likely you have gotten the H14/16 version in error. You should have gotten 5204 RUDDER CAM KIT H17/18/20 (Getaway too).

50322001 RUDDER CASTING LWR BLACK

Comes with a cam installed.

Image


Matt, are the cams themselves the same for both kits?

_________________
Zach


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Sun Apr 08, 2018 9:52 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Apr 08, 2018 1:26 pm
Posts: 4
So I need that plus the cam and pin for the starboard casting
I have the cam but the pin is not long enough.
What’s the number for the pin? The starboard casting is still good


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Mon Apr 09, 2018 7:50 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12365
Location: Oceanside, California
5203 RUDDER CAM SCREWS H17/18/20

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Mon Apr 09, 2018 8:15 am 
Offline
Site Rank - Deck Hand

Joined: Sun Apr 08, 2018 1:26 pm
Posts: 4
are the cams the same for both the wave and getaway?


Top
 Profile  
 
 Post subject: Re: Rudder cams and pins
PostPosted: Mon Apr 09, 2018 8:31 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12365
Location: Oceanside, California
Yes.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group