Hobie Forums http://www.hobie.com/forums/ |
|
Hobie Wave Hull Access Cover Repair http://www.hobie.com/forums/viewtopic.php?f=24&t=34390 |
Page 1 of 1 |
Author: | rmlongo [ Sun Mar 13, 2011 6:42 pm ] |
Post subject: | Hobie Wave Hull Access Cover Repair |
I want to repair leaking Wave hull plugs (the ones on the top deck below the purple seat covers). I found the far back ones and resiliconed them in but wanted to know if there are others. The Hobie parts list pdf doesnt seem to show them specifically and I don't want to rip up the seat pads any more than I have to. Any help on the location and quantity would be appreciated. Thanks! |
Author: | IndyWave [ Tue Mar 15, 2011 12:33 pm ] |
Post subject: | Re: Hobie Wave Hull Access Cover Repair |
There's an access port hidden under each of the four seat pads. The factory seals them with a hot-melt glue gun, but that usually only lasts a few years. Newer boats also have screws holding the plates down, but they can still leak. Nothing sticks forever to these hulls, including the seat pads; so they all need to be re-glued from time to time. |
Author: | Mimi Appel [ Thu Apr 14, 2011 3:31 am ] |
Post subject: | Re: Hobie Wave Hull Access Cover Repair |
Hey Jack, Do the new boats need sealing? Or did they fix it? mka |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |