Return to Hobie.com
Hobie Forums
It is currently Mon Nov 12, 2018 10:29 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2
Author Message
PostPosted: Tue Jul 03, 2018 6:48 am 
Offline
Site Rank - Deck Hand

Joined: Mon Jul 02, 2018 1:41 pm
Posts: 2
No idea how it failed. I replaced that connection with a bolt and lock nut. I am not sure why that connection is not more permanent from Hobie. Waiting to hear if its a warranty issue.

(a few weeks later)...

Hobie covered it under warranty. That is standing up right there, folks. Getting a new crossbar next week.


Top
 Profile  
 
PostPosted: Sat Jul 28, 2018 10:11 pm 
Offline
Site Rank - Deck Hand

Joined: Fri Jan 16, 2015 11:12 pm
Posts: 4
arielpeeri wrote:
I have been sailing my Wave, with the pin inserted at bottom of mast, after watching official video by Hobie and other by users who showed the pin inserted and ready to sail. A friend told me yesterday that I should take the pin out once the boat is rigged, and [color=#000000][/color]sail without it, insert it back at end before lowering the mast.
Which is true?
Will it feel differently sailing without the pin?
Thanks!
Ariel


Hi

On a Hobie Wave the pin should remain in. On other cats that may or may not be the case depending on the design.

My Hobie Wave manual (about 10 years old) revision C #3845-0010 states on page 10:
"For safety, the pin should remain in the mast base while sailing".

For myself, I sail in Moreton Bay, Queensland, which can get quite windy and choppy so I have my rig loose, maybe too loose, but I have seen the rig bouncing around while tacking into the waves and been very glad there was a pin in the base to keep the mast on. If the mast came off at the base, while tacking into the wind I am not sure which way it would go but it is possible the mast could came back and hit someone.

So I always keep the pin in, and have a loose lead tied to the mast to the pin so as not to lose it. I also always carry a spare in my kit.

The Wave mast rotates freely with the pin in.

However, I did sail another cat a few years ago where the pin was used only for raising and lowering the mast, and needed to be removed when sailing, but that is not the case with the Hobie Wave which has many very good features to simplify sailing that I appreciate every time I go out.

Hope that helps.

All the best
Owen


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page Previous  1, 2

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group