Hobie Forums
http://www.hobie.com/forums/

Hobie Wave Trampoline Replacement Procedures
http://www.hobie.com/forums/viewtopic.php?f=24&t=60045		 Page 1 of 1
Author:  maxavier [ Thu Mar 02, 2017 12:36 pm ]
Post subject:  Hobie Wave Trampoline Replacement Procedures
Is it necessary to take a hull off to replace the trampoline? My tramp is in bad shape and I'm not sure if I can make it to a beach, it is currently hanging in a davit. It doesn't look like it has notched crossbars like the Getaway, but I could be missing something?
Author:  mmiller [ Thu Mar 02, 2017 3:28 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
Yes, the wave has to come apart.
Author:  maxavier [ Thu Mar 02, 2017 3:36 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
>_<
Author:  mmiller [ Thu Mar 02, 2017 3:40 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
Ahhh. It's easy! We used to build waves for shows and have them built in about 8 minutes... sails up. That a look at the manual or assembly video for some guidance.

http://www.hobiecat.com/support/wave/

http://static.hobiecat.com/digital_asse ... manual.pdf
Author:  tradisrad [ Thu Mar 02, 2017 3:49 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
You can probably get away with removing one hull only. Get a friend to help....
Author:  mmiller [ Thu Mar 02, 2017 4:26 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
tradisrad wrote:
You can probably get away with removing one hull only. Get a friend to help....


+1!
Author:  maxavier [ Thu Mar 09, 2017 1:11 pm ]
Post subject:  Re: Hobie Wave Trampoline Replacement Procedures
Thank you for your support. The pain comes from getting the boat to a viable beach on the lake without falling through the tramp. I may just paddle on a low or favorable wind direction day. I will find a way : )
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/