Seperate part #s for jib install hardware?

Since I already have the spreader bar, is there a list of the other part #s I'd need for the jib install? The only part # I can find is for the whole kit - bar and hardware - which I don't need.

Thanks,
Andy

COMPONENT NUMBER QTY PER BILL DESCRIPTION B O M COMPONENT TYPE
10730000 1.00 CLEAT-MAST R
20810011 1.00 WIRE FORESTAY H16 UPR 20810011 S
3103 1.00 BLOCK, MINI W/AXLE 3103 S
38120041 2.00 TANG HW BOW SPREADER R
38760041 2.00 CAM CLEAT PLT-CLUB/SE R
38999021 1.00 BOW SPREADER - WAVE 38999021 S
50017 2.00 SWIVEL CAM CLEAT R
8030111 2.00 SCREW 10-32 X 1 PHMS-P SS R
8030331 4.00 SCREW 1/4-20 X 5/8 PHMS-P SS R
8031211 6.00 SCREW 8-32 X 5/8 FHMS-P SS R
8050811 6.00 NUT 8-32 NYLOCK LO-PRO SS R
8051301 2.00 NUT 10-32 SQUARE SS R
92870000 1.00 SHACKLE HEADBOARD 3/16 R
RM014RED 27.00 LINE 1/4" SPUN DACRON - RED R
RX316WHT 27.00 LINE 3/16 STA-SET X POLY R

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)