| Hobie Forums http://www.hobie.com/forums/ |
|
| Wave Tiller Cross Bar dimensions http://www.hobie.com/forums/viewtopic.php?f=24&t=63153 |
Page 1 of 1 |
| Author: | sailingkayak [ Tue Jul 10, 2018 11:06 am ] |
| Post subject: | Wave Tiller Cross Bar dimensions |
Could someone please tell me the dimensions of the Hobie Wave Tiller cross bar. Length (I think 62"?) OD and ID. Just buying a used Wave and the cross bar needs replacing. |
|
| Author: | HutchCanada [ Tue Jul 10, 2018 11:36 am ] |
| Post subject: | Re: Wave Tiller Cross Bar dimensions |
Older or newer Wave? I have a '96 that has the rubber elbows. Currently replacing them with the newer style connectors...and I'm pretty sure my existing crossbar is going to be too short unless I bend the rudder arms in a little... Sent from my SM-G930W8 using Tapatalk |
|
| Author: | sailingkayak [ Tue Jul 10, 2018 2:49 pm ] |
| Post subject: | Re: Wave Tiller Cross Bar dimensions |
It's newer. 5 years old. |
|
| Author: | leecea [ Tue Jul 10, 2018 6:09 pm ] |
| Post subject: | Re: Wave Tiller Cross Bar dimensions |
Mine has EZ Lock rudders and the bar looks to be about 66 3/4" long with OD 1 1/8". These are approx. and do not count the ends - just the bar itself. Don't know ID. |
|
| Author: | sailingkayak [ Wed Jul 11, 2018 1:37 pm ] |
| Post subject: | Re: Wave Tiller Cross Bar dimensions |
Thank you all. Good info. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|