| Hobie Forums http://www.hobie.com/forums/ |
|
| EZ Loc Rudder Adjustment http://www.hobie.com/forums/viewtopic.php?f=24&t=70491 |
Page 1 of 1 |
| Author: | sbollenb [ Mon Jan 02, 2023 10:09 am ] |
| Post subject: | EZ Loc Rudder Adjustment |
I have the EZ Loc rudder system. I'm trying to get the rudder blades parallel (3/8" off). If I can shorten the crossbar by 1/8" that would do it. I can't seem to get the ends off. I'm thinking of cutting the crossbar midway, then joining with a tubing sleeve at the correct length. Is there another way to adjust the rudder blades? |
|
| Author: | sbollenb [ Tue Jan 03, 2023 11:13 am ] |
| Post subject: | Re: EZ Loc Rudder Adjustment |
A machine shop took the fixed end off the tiller bar and cut 1/8" off the end of the bar, then reinstalled the end pin. The rudders are aligned and all is good! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|