Return to

Hobie Forums

It is currently Sun Jan 21, 2018 5:57 am

All times are UTC - 8 hours [ DST ]

Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Mon Jul 16, 2012 11:17 am 
Site Rank - Admiral

Joined: Wed Sep 07, 2011 9:48 am
Posts: 205
Location: Portland, OR
I hit the Willamette on Sunday in my kayak with my new depthfinder (HB 597ci HD DI Combo). I had hurriedly installed it the night before. Everything seemed to be working fine. When I got to the river I hooked up the power to make sure it was still OK. Nothing. After about a half hour of sitting on the shore jiggling the wires I finally was able to get repeatable power. I will need to re-solder one of the connections

So I finally head out and start fishing for bass while watching the beautiful display. I am quite impressed with the screen and the detail. However since I was moving along and casting I did not have an opportunity to play with the sonar. However, I was planning on splitting the day between bass and sturgeon so I could monkey with the sonar while I was anchored up. I fished for bass from 9:30 to 1:00 and caught 6 smallmouths. The two biggest were 15" twins, the others not so monstrous

Around 1:00 or so I pull up on shore to swap my bass rods for my sturgeon rod. I headed back out, just chomping at the bit to get a peak at some of the sturgeon areas where I have been doing well. All of a sudden my sonar starts giving bizarre readings for depth (like one foot deep). I later traced the problem to the fact that the little well I made to hold the transducer inside my hull had a developed a leak (probably did it when I pulled onto shore) and the water in the well had all leaked out. However at the moment I thought the finder had a problem. Thus, I went sturgeon fishing "blind" and deeply disappointed. I fished for a couple of hours, had a few bites, but did not hook anything (mostly sitting on the river rebooting my sonar again and again and not watching my rod). When I got to shore to leave I discovered the leaking well. I put some water in it and pulled my kayak out into a couple of feet of water and all was fine for the minute or so the well was full.

Thus, overall I had a frustrating day even though I did catch some bass. It was not the intro trip with the new sonar I was hoping for. I can not wait until I can get out again to give it a proper maiden voyage. However, overall I would have to say the my preliminary opinion of the unit is extremely positive - my opinion of my rush job installation is very negative While bass fishing the down imaging gave nice pics of the boulders and rocks I was fishing around. I used the split screen sonar/down imaging most of the time. It was cool to be able go forward or back one view to have a full screen sonar or DI view to zoom into details. The GPS feature looks good and seems to work but I did not test out its accuracy. I will give the unit a much better tire kicking next time out and write up a better report.

Overall I would recommend the unit, but not recommend that I install it If anyone has any questions on the unit feel free to ask them here or PM me.

Fish tremble when they hear my name :)

A ship in harbor is safe -- but that is not what ships are built for.
--John A. Shedd, Salt from My Attic, 1928

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group