Dcamposs, welcome to the forum. Options for the front cockpit are limited only by your imagination. It looks like there may be some space for ram mounts right in front of the forward rudder up/down handles. The existing lines in that area can probably slide along the mounting hardware. You can also use one of your cup holders to position a ram mount, either flush or jacked up with spacers. How about adding a couple of custom length Hobie "H" rails (like the Pro Angler uses) for mounting all kinds of gear?
I suspect you can get these in various lengths so the span would work with appropriate mounting surfaces on the cockpit rail. Just remember for through-hull fittings, you need to be able to reach the mounting areas from inside the hull through one of the hatches.
For the rear cockpit, many have made multiple rod holders out of PVC, anchored in the existing rod holders. Use the search feature to get more great rigging ideas!