Hobie Forums http://www.hobie.com/forums/ |
|
Has anybody tried to put a dagger board via the peddle slot? http://www.hobie.com/forums/viewtopic.php?f=32&t=3176 |
Page 3 of 3 |
Author: | Roadrunner [ Sun Jan 13, 2008 1:15 am ] |
Post subject: | |
Stringy, brilliant as usual!! |
Author: | stringy [ Sun Jan 13, 2008 1:44 am ] |
Post subject: | |
Thanks Roadrunner- much appreciated! I've just returned from a week away where we did a lot of kayaking with the twin sails getting an extensive work-out. Overall I'm very pleased and will post a detailed report soon |
Author: | Apalach [ Sun Jan 13, 2008 7:38 pm ] |
Post subject: | |
Hey Striingy, WOW--fantastic job! I love it!! And besides looking good, it actually works as intended--thanks for the info. Dick |
Author: | kepnutz [ Mon Jan 14, 2008 9:17 pm ] |
Post subject: | |
G'day Stringy Nice job again as per usual on your adaptation of the daggerboard. How does she run now with the twinzer , furler , rudder and dagger ? Have you had any dunkers or close ones out on the billabongs ? All she needs now is a thunder box , sink and some plumbing . If you're not careful you're going to run out of stuff to make.. Cheers Kepnutz |
Author: | kepnutz [ Tue Jan 15, 2008 9:00 pm ] |
Post subject: | |
G'day Stringy Look's like you have the leaning part down pat mate. I find the need to hike out still remains even with our side kicks in place. Both sails look to be in fine trim, I was wondering if they are too far apart to offer any additional "slotting" power when close hauled. She's got to be a real ripper downwind though. I bet you do have a bit of rudder/ helm issue's with both sails up and a good breeze on , too right. So what type of glue are you using to keep your hat on ? Cheers Kepnutz |
Author: | hoit [ Thu Jan 17, 2008 4:27 am ] |
Post subject: | |
Good work on the daggerboard Stringy and nice sailing action. Ancientmariner, I have started to sail my Revo with turbo fins and the sailing rudder in up to 15 knots winds. I don't want the hassle or see the need for sidekicks or a daggerboard. The sailing ability of the Revo with the turbo fin / sailing rudder combo has exceeded my expectations. |
Author: | stringy [ Fri Jan 18, 2008 12:10 am ] |
Post subject: | |
Thanks hoit, I agree with you that on a single drive boat I would rather have the miragedrive instead of the daggerboard. The turbo's improve the centreboard effect dramatically and the loss of the drive negates the slight benefit of the daggerboard. With two sails and solo on the tandem the daggerboard does improve upwind sailing considerably though Kep- I'm not sure if there is a benefit from the slot effect due to the angled sail shape. PS- A tight chin strap helps keep the hat on |
Author: | MrLight [ Sun Feb 06, 2011 4:41 am ] |
Post subject: | Re: Has anybody tried to put a dagger board via the peddle s |
mineson wrote: I am about to buy a outback and I am very interested in the sailing ablility. Without a centerboard it seemd that the yaks must get a little squirrley in a good breeze. I was thinking that if you pulled the peddle drive it would be a good spot to put in a fabicated dagger board. You could run it alittle above and brace it from the yaks sides if more support is needed. why I should not think of that idea. Geez! I will try it soon. |
Author: | oasisman [ Sat Oct 06, 2012 4:37 am ] |
Post subject: | Re: |
stringy wrote: Thanks hoit, With two sails and solo on the tandem the daggerboard does improve upwind sailing considerably though Hi stringy, where do you put the daggerboard: into forward drive-well or into the back drive-well, please? |
Author: | stringy [ Sat Oct 06, 2012 3:12 pm ] |
Post subject: | Re: Has anybody tried to put a dagger board via the peddle s |
Oasisman, Forward drivewell, with water ballast dry bag on top of it. |
Author: | oasisman [ Sun Oct 07, 2012 4:30 am ] |
Post subject: | Re: Has anybody tried to put a dagger board via the peddle s |
Thank you for your answer. |
Page 3 of 3 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |