i have tried to attach a photo but not sure if it will be visible. it is the forward ama/aka. it is between where it folds and the fairlead looking part that bolts the crossbar to the boat. i need a part number to order a new one. thanks
| Hobie Forums http://www.hobie.com/forums/ |
|
| 2011 TI port side plastic cuff cracked http://www.hobie.com/forums/viewtopic.php?f=32&t=64001 |
Page 1 of 1 |
| Author: | tronati [ Tue Nov 27, 2018 1:37 pm ] |
| Post subject: | 2011 TI port side plastic cuff cracked |
i have tried to attach a photo but not sure if it will be visible. it is the forward ama/aka. it is between where it folds and the fairlead looking part that bolts the crossbar to the boat. i need a part number to order a new one. thanks
|
|
| Author: | mmiller [ Tue Nov 27, 2018 2:41 pm ] |
| Post subject: | Re: 2011 TI port side plastic cuff cracked |
That is called an "edge guard". It helps to keep the crossbar outer edges from getting dinged when the akas are not inserted. 79532201 EDGE GUARD - ISL XBAR US$ 7.59 (USA USD 11/2018) z188.jpg)
|
|
| Author: | tronati [ Tue Nov 27, 2018 3:12 pm ] |
| Post subject: | Re: 2011 TI port side plastic cuff cracked |
thanks matt. is sounds like it is not structural, is that correct? we leave the akas in all the time. |
|
| Author: | mmiller [ Tue Nov 27, 2018 5:26 pm ] |
| Post subject: | Re: 2011 TI port side plastic cuff cracked |
Not at all needed. |
|
| Author: | ciberges [ Sat Jan 16, 2021 7:51 am ] |
| Post subject: | Re: 2011 TI port side plastic cuff cracked |
Hey Miller! Do you have the code number for the Crossbar Edge Guard small screw? Regards, Manu |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|