Return to Hobie.com

Hobie Forums

It is currently Thu Aug 17, 2017 11:47 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Apr 11, 2017 7:50 am 
Offline
Site Rank - Deck Hand

Joined: Tue Apr 11, 2017 6:56 am
Posts: 2
Can someone provide the precise length of the aluminum extrusion from base to comp-tip?
also, placement of the spreader mounts (distance from base of extrusion to lower edge of tang)
also placement of diamond wire tang (mast base to lower or top end of tang)
also placement of main mast tang at top where forestay and side shrouds connect.
also placement of the sail feeder and length of the sail feeder opening.
The manual says the mast is 31' long, however the (already replaced) mast on my new(used) boat is 31' 2 1/4 inch.
I am transferring the mast hardware to a replacement mast (from Hobi 18 without comp-tip). The problem is that my existing H 20 mast is not the original. The previous owner has already replaced the mast and it is 2.25 inches longer than the specs say it should be. so the placement of tangs and comp-tip are suspect.


Top
 Profile  
 
PostPosted: Tue Apr 11, 2017 11:05 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 11814
Location: Oceanside, California
https://static.hobiecat.com/web_uploads/2017/04/11/40581000_M-20_Mast_Assembly.jpg

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Tue Apr 11, 2017 9:52 pm 
Offline
Site Rank - Deck Hand

Joined: Tue Apr 11, 2017 6:56 am
Posts: 2
That drawing is FANTASTIC!
thank you.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group