Return to Hobie.com

Hobie Forums

It is currently Thu Nov 23, 2017 4:08 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Sep 02, 2017 2:22 pm 
Offline
Site Rank - Deck Hand

Joined: Tue Aug 15, 2017 10:38 am
Posts: 2
Hello All,

We just bought H20 sail #360 in Charleston SC. I got the EPO 3 rudders and am looking to install them but the head profile is a lot different as well as the shape of the blade and the leading edge of the rudder head. I see these are big problems moving forward.

First, rudder head shape. The overall shape of the head doesn't seem to work with the rudder casting I have, which I believe is the stock casting for this boat.

Second, the lower leading edge of the rudder doesn't fit into the curve of the casting when the rudder would be in the down position.

Third, the shape of the foil is so different that the placement of the rudder in the down position is critical.

I have been searching and searching for photos or descriptions of how people dealt with these issues with little to no luck. Have any of you installed these EPO 3 rudders? How? Photo? Process?

_________________
Thank you.

Ned Goss '02
College Of Charleston
Dock Master & Offshore Sailing Coach

Cell 843-270-2172

Sail Calm, Sail Confident, Sail For Fun...


Top
 Profile  
 
PostPosted: Tue Sep 05, 2017 12:06 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 11997
Location: Oceanside, California
Rudder FAQ: https://www.hobie.com/forums/viewtopic.php?f=18&t=467

Image

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
PostPosted: Sat Sep 09, 2017 8:27 am 
Offline
Site Rank - Deck Hand

Joined: Tue Aug 15, 2017 10:38 am
Posts: 2
Thank you Matt. I have found this template before however like your post its not to scale. I found one that is to scale but it doesn't have the h20 hole positions. Do you have the ability to make a PDF to scale with the H20 hole positions on it?

Also, I did see on the post about the H20 Magnum and the comment about the older H20 cracking on the inboard side by the front cross bar. Mine has that crack and I would like to know your thoughts on repairs. It is in front of the bulkhead so fixing from the inside is not possible without cutting a hole or removing bulkhead.

_________________
Thank you.

Ned Goss '02
College Of Charleston
Dock Master & Offshore Sailing Coach

Cell 843-270-2172

Sail Calm, Sail Confident, Sail For Fun...


Top
 Profile  
 
PostPosted: Sat Sep 09, 2017 5:12 pm 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5116
Location: Detroit, MI
Download the image, bring it into a image editing program (Photoshop or Gimp (free)), adjust the scale, print, measure, repeat until the printed size is correct.

It isn't rocket surgery.


Top
 Profile  
 
PostPosted: Mon Sep 11, 2017 8:27 am 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 11997
Location: Oceanside, California
Most print functions allow you to scale as well.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group