| Hobie Forums http://www.hobie.com/forums/ |
|
| Brackets for bridle wires on bows http://www.hobie.com/forums/viewtopic.php?f=34&t=62846 |
Page 1 of 1 |
| Author: | Hobiecowboy [ Tue May 29, 2018 11:56 am ] |
| Post subject: | Brackets for bridle wires on bows |
Some previous owner siliconed around the brackets where the bridle wires attach to the bows. It’s peeling off so my question is that silicone must not have been structural correct? Just there to keep water out right? Thanks in advance, guys! |
|
| Author: | srm [ Wed May 30, 2018 5:49 am ] |
| Post subject: | Re: Brackets for bridle wires on bows |
Correct, not structural. If I recall, the tangs are bolted to a bulkhead inside the hull and the hulls came from the factory with caulk around the tangs. sm |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|