Hobie Forums
http://www.hobie.com/forums/

whats the measurement on the 2007 tiger main does anyone kno
http://www.hobie.com/forums/viewtopic.php?f=37&t=10701
Page 1 of 1

Author:  hobie18rich [ Thu Sep 11, 2008 9:30 am ]
Post subject:  whats the measurement on the 2007 tiger main does anyone kno

B.4.1.4. Maximum Upper width at upper leech point 1500 mm from head point : 1290 mm

B.4.1.4 & B.4.1.5: Sails with larger measurements can be measured and used until 01.01.2009.

Author:  DHFiend [ Thu Sep 11, 2008 2:13 pm ]
Post subject:  Re: whats the measurement on the 2007 tiger main does anyone

hobie18rich wrote:
B.4.1.4. Maximum Upper width at upper leech point 1500 mm from head point : 1290 mm

B.4.1.4 & B.4.1.5: Sails with larger measurements can be measured and used until 01.01.2009.


I assume you are using a 2007 STX Smoke mainsail and looking to compete in F18 regattas in 2009. Am I correct in this thinking?

Author:  hobie18rich [ Thu Sep 11, 2008 2:30 pm ]
Post subject: 

Yes I saw the change noted and wondered if the tiger main is still legal.

Author:  DHFiend [ Thu Sep 11, 2008 5:47 pm ]
Post subject: 

hobie18rich wrote:
Yes I saw the change noted and wondered if the tiger main is still legal.


I am running a mock F18 measurement certificate for 2009 this weekend - I will let you know how the main measures in on Monday...

Paul

Author:  hobie18rich [ Thu Sep 11, 2008 6:26 pm ]
Post subject: 

thank you

Author:  DHFiend [ Sun Sep 14, 2008 9:12 pm ]
Post subject: 

hobie18rich wrote:
thank you


2008 STX Smoke mainsail - 1275mm at 1500mm down from intersect of max head and luff - looks like STX mains are good to go....

Author:  Dan DeLave [ Tue Sep 16, 2008 8:16 am ]
Post subject: 

DHFiend:

What is the sail number on the one you measured?

Later,
Dan DeLave

Author:  USA2477 [ Tue Sep 16, 2008 2:05 pm ]
Post subject: 

Dan DeLave wrote:
DHFiend:

What is the sail number on the one you measured?

Later,
Dan DeLave


We measured the main for USA 2477. Main was delivered in March.

Paul Andrepont

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/