| Hobie Forums http://www.hobie.com/forums/ |
|
| new spin poles http://www.hobie.com/forums/viewtopic.php?f=37&t=12784 |
Page 1 of 2 |
| Author: | hobie18rich [ Mon Jun 15, 2009 2:49 pm ] |
| Post subject: | new spin poles |
How are the new poles supposed to be held together? Are the drilled holes supposed to line up? What hardware should I use to put it together? Are the screws that hols the loop supposed to be stripped? Btw I am refering to the new 2 piece pole assembly that is bieng issued now. |
|
| Author: | Jbernier [ Mon Jun 15, 2009 4:02 pm ] |
| Post subject: | Re: new spin poles |
you can rivet (but this makes it permanent and less easy to break down) or use a self tapping screw, they leave it up to the user. Many guys complain and say its difficult to store the pole in one piece - so we have them in 2 piece as well. You still receive a one piece pole with a new boat - but if you order a replacement the poles will come 2 piece (its better for shipping as well - since these are only a truck freight item and makes it rather expensive and time consuming to ship - much better in two pieces) |
|
| Author: | Johnny Wildcat [ Tue Jun 16, 2009 8:58 am ] |
| Post subject: | Re: new spin poles |
Make a 12 foot long, shoe box style sailbox. Then you have no worries about transporting/storing your full size spin pole. I used 4X8X1/4 inch sheets of plywood and glued up with an 4 foot offset. The results were sheets 4X12X1/2 inch. Then I cut to size for the sides, top and bottom then glassed/painted for weatherproofing. Since I have a double stack trailer, I made the box big enough for two Tigers worth of stuff. See the end result in the background of the attached photo. 
|
|
| Author: | Tom Machette [ Tue Jun 16, 2009 9:13 am ] |
| Post subject: | Re: new spin poles |
Hey Tigerboy, Are those sailboards in your garage? |
|
| Author: | Johnny Wildcat [ Tue Jun 16, 2009 10:18 am ] |
| Post subject: | Re: new spin poles |
Sorry Tom...those are surfboards. I surf the Great Lakes when I'm not sailing. The photographic evidence of Great Lakes waves is shown below...somewhere (secret spot) on Lake Michigan in November.  ...and they say you can't surf on a lake... |
|
| Author: | Sail Revolution [ Tue Jun 16, 2009 12:29 pm ] |
| Post subject: | Re: new spin poles |
Nice Surf City plug and nice wave JB! J |
|
| Author: | MBounds [ Wed Jun 17, 2009 7:15 am ] |
| Post subject: | Re: new spin poles |
Tigerboy1 wrote: Lake Michigan in November. Somethin' aint' right about that boy . . . |
|
| Author: | Karl Brogger [ Wed Jun 17, 2009 5:32 pm ] |
| Post subject: | Re: new spin poles |
Jbernier wrote: You still receive a one piece pole with a new boat - but if you order a replacement the poles will come 2 piece (its better for shipping as well That's not cool. This is why we should be able to make our own, and remain class legal. |
|
| Author: | mike hensel [ Wed Jun 17, 2009 6:09 pm ] |
| Post subject: | Re: new spin poles |
Yep and if they forget to ship your spin pole with your brand new FX One, then they send you a two piece so it is easier for them to ship. I'm still a bit pissed about that. I am not sure if i got a replacement pole or they just took the one that was supposed to come with my boat and cut it in half. In any case, you should get what you are purchasing, in my opinion. I have learned to be very specific when ordering parts from Hobie. I always inspect every thing thoroughly. |
|
| Author: | hobie18rich [ Wed Jun 17, 2009 6:39 pm ] |
| Post subject: | Re: new spin poles |
You can buy a new 1 piece spin pole its $16,500.00 for the Tiger and $22,500.00 for the Wildcat pole. You just get extra parts for that price. |
|
| Author: | Karl Brogger [ Wed Jun 17, 2009 9:39 pm ] |
| Post subject: | Re: new spin poles |
I understand shipping being a pain in the pooper for a 12' piece of aluminum, but everyone else seems to have a handle on it. I just see it as a compromise that isn't worth it. |
|
| Author: | mike hensel [ Thu Jun 18, 2009 5:42 am ] |
| Post subject: | Re: new spin poles |
Quote: You can buy a new 1 piece spin pole its $16,500.00 for the Tiger and $22,500.00 for the Wildcat pole. You just get extra parts for that price. Not a garentee, read my post, I ended up with a two peice with my new boat. |
|
| Author: | Jbernier [ Thu Jun 18, 2009 8:36 am ] |
| Post subject: | Re: new spin poles |
This thread is taking a turn to negative-ville.  If you have an issue - please e mail me direct, I'll take care of your concern. ([email protected]) The reality is to ship a one-piece pole requires it shipping via a trucking company - we had numberous issues with shipping damage (not to mention the high cost) sometimes costing as much to ship as the pole costs/ Again, if you are not satisfied with something speak to your dealer so we can remedee it! |
|
| Author: | gthomas [ Thu Jun 18, 2009 10:12 am ] |
| Post subject: | Re: new spin poles |
What's wrong with a 2 piece spinnaker pole anyway? Anybody been windsurfing in the last 15+ years? |
|
| Author: | srm [ Thu Jun 18, 2009 10:47 am ] |
| Post subject: | Re: new spin poles |
gthomas wrote: What's wrong with a 2 piece spinnaker pole anyway? Anybody been windsurfing in the last 15+ years? I was wondering the same thing. All windsurfing masts currently made are 2-piece masts. This is true for all manufacturers, all constructions, and all sizes (from 340cm to 580cm). As long as the mast is made and used properly, there are no issues. Much easier to ship and store a two-piece. Also, if it breaks, sometimes you can just replace the broken half rather than the whole thing. sm |
|
| Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|