Hobie Forums
http://www.hobie.com/forums/

How Much Line for a Spin Halyard?
http://www.hobie.com/forums/viewtopic.php?f=37&t=25803
Page 1 of 1

Author:  Tallguy1 [ Tue Jun 01, 2010 4:34 pm ]
Post subject:  How Much Line for a Spin Halyard?

What size line and what length do I need for my Tiger? I've got it setup with two lines knotted together, it's far from optimal. I use a single line system for raising and retreaval, I think, I've only rigged and sailed the boat once so any info is helpful.

Thanks!

Author:  Sail Revolution [ Tue Jun 01, 2010 5:56 pm ]
Post subject:  Re: How Much Line for a Spin Halyard?

90' @ 5mm. You'll have a little left over.

Author:  Tallguy1 [ Tue Jun 01, 2010 7:02 pm ]
Post subject:  Re: How Much Line for a Spin Halyard?

Thanks J!!

Author:  hobie18rich [ Tue Jun 01, 2010 9:20 pm ]
Post subject:  Re: How Much Line for a Spin Halyard?

Buy the pre tapered halyard makes a huge difference in not geting twists that hang up on the hoist or douse. Available at your local Hobie Cat Dealer. Jeremy should have recomended that already up there.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/