Hobie Forums http://www.hobie.com/forums/ |
|
new forstay part numbers http://www.hobie.com/forums/viewtopic.php?f=37&t=35051 |
Page 1 of 1 |
Author: | hobie18rich [ Tue Apr 19, 2011 3:02 pm ] |
Post subject: | new forstay part numbers |
I'm switching from a furling to a non furling forstay. Is there a complete kit or do i need to order parts individually? From page 7 of the tiger manual on line. is the first number the kit, and the next 10 the individual parts? 18060512 : Jeu de câbles Tiger 2007 sans enrouleur Wire bag Tiger 2007 w/o jib furler Käbelsatz Tiger 2007 ohne Fockwickler 1 - 99220058 : Manille Lyre D8 PKG 10 Shackle D8 Schäkel D8 2 - 18060518 : Etai + estrope Tiger 2007 Forestay + pigtail Tiger 2007 Vostage + Pigtail Tiger 2007 3 - 99500478 : Poulie simple micro Single block Block einzig 4 - 18060450 : Drisse de foc cordage Jib halyard rope Fockfall-Leine 5 - 99220034 : Axe percé latte ridoir PKG 10 Clevis pin Bolzen f. Locheisen gebohrt 6 - 99220031 : Anneau Brisé PKG 10 Split ring Ringsplint 7 - 99220033 : Latte ridoir universelle PKG 5 Stay adjuster Wantenspanner 8 - 18061579 : Bride Tiger Bridle Tiger Hahnpot Tiger 9 - 99500495 : Poulie airblock avec émerillon Airblock with swivel Block mit Wirbel 10 - 18060532 : Etai rigide Rigid forestay |
Author: | MBounds [ Tue Apr 19, 2011 6:35 pm ] |
Post subject: | Re: new forstay part numbers |
I did the conversion without getting any new parts - just stuff from the spare parts box. Started with this picture. |
Author: | hobie18rich [ Thu Apr 21, 2011 1:05 pm ] |
Post subject: | Re: new forstay part numbers |
I need new forstay anyway so I wanted the whole new system. |
Author: | hobie18rich [ Fri Apr 22, 2011 5:52 pm ] |
Post subject: | Re: new forstay part numbers |
Guess there is no one that can figure this out? The Euro part numbers don't seam to cross over. |
Author: | Tallguy1 [ Sat Apr 23, 2011 1:40 pm ] |
Post subject: | Re: new forstay part numbers |
I did the same thing as the photo, but don't get the rigid forestay thing, just use a small line to tension the spin pole. I got everything I needed , except for the forestay itself and bridles at West Marine. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |