Hobie Forums
http://www.hobie.com/forums/

What's the best tank mounting for rear well of a Revo 13?
http://www.hobie.com/forums/viewtopic.php?f=40&t=43857
Page 1 of 1

Author:  Mongo Johnson [ Sat Jul 14, 2012 10:22 am ]
Post subject:  What's the best tank mounting for rear well of a Revo 13?

Mindful of a potential surf-launch tumble, I was considering a mounting a pair of tank straps to the floor of the rear well.

The tank would be solidly rigged/strapped with BC, but be fairly easily unrigged with a standard strap release. Seemed it might be less dangling than with bungees/hooks.

One aquaintence suggested it was too much . . . as might be all-the-way-around the hull 1" cam straps. Cams might keep the tank and hoses more flush and not have the gear stressing the well floor.

A suggested solution was adding some eyelets and using heavier bungies than the stock Revo criss-cross bungees.

I was thinking a wide backing plate under the well might protect the plastic, but be solid and clean and then have the strap mounts attach to that or loop through a facing flat plate.

Tank weights 20-30, with added weights on BC . . . 50. Might need to stow weight up front to balance . . . ?

Just wondering about the boat doing a bit of rotation.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/