90710009 END CAP, VERT SPRT 5/16 - 18
z80.jpg)
You can probably use the existing stud. Loc Tite'ed in I bet. Confirm it is 5/16"-18
or
90710000 A-FRAME SUPPORT w/STRAP -NEWER Serial Numbers 702 - Higher $66.09
| Hobie Forums http://www.hobie.com/forums/ |
|
| Part number clarification http://www.hobie.com/forums/viewtopic.php?f=42&t=64203 |
Page 1 of 1 |
| Author: | Bourkey [ Tue Jan 22, 2019 8:52 pm ] |
| Post subject: | Part number clarification |
Matt, I snapped the base of the A-frame vertical support this morning. Am I able to purchase the screw-in plastic insert that rivets into the base of the vertical support? If so, could please clarify the part number. https://share.icloud.com/photos/06GcEJG ... w#Parkwood https://share.icloud.com/photos/0g5CEdV ... g#Parkwood Thanks for your help. |
|
| Author: | mmiller [ Thu Jan 24, 2019 6:51 pm ] |
| Post subject: | Re: Part number clarification |
90710009 END CAP, VERT SPRT 5/16 - 18 You can probably use the existing stud. Loc Tite'ed in I bet. Confirm it is 5/16"-18 or 90710000 A-FRAME SUPPORT w/STRAP -NEWER Serial Numbers 702 - Higher $66.09 |
|
| Author: | Bourkey [ Sat Jan 26, 2019 1:35 am ] |
| Post subject: | Re: Part number clarification |
Thanks for the quick reply Matt Cheers |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|