Hobie Forums http://www.hobie.com/forums/ |
|
New mast for the 21SE http://www.hobie.com/forums/viewtopic.php?f=45&t=62337 |
Page 2 of 3 |
Author: | kevinbatchelor [ Sat Apr 14, 2018 7:36 pm ] |
Post subject: | Re: New mast for the 21SE |
The mast diameter is the same I think I read that the two mast came from the same extrusion. |
Author: | kevinbatchelor [ Mon Apr 16, 2018 7:45 pm ] |
Post subject: | Re: New mast for the 21SE |
Bill, maybe they will give us a discount if I build them a new website, that thing looks like it was built in 1996 and hasn't been updated since. |
Author: | jem135 [ Fri Apr 20, 2018 10:24 am ] |
Post subject: | Re: New mast for the 21SE |
Bill / Tom At 500 or 600 lbs do we have a cost yet from Aquarius , Tom, what the new mast might cost? I would be interested in getting it complete...diamond wire , halyard ect... Jim Higgins Lake Mi |
Author: | kevinbatchelor [ Thu Jun 14, 2018 8:43 pm ] |
Post subject: | Re: New mast for the 21SE |
I even emailed Aquarius directly and got no response frankly I can't imagine it would be worth it for them. mmiller do you have any diagrams or measurements for the comp tip that we could use to have a new mold built? From what I understand the comp tip is the same for se and sc except the mast head. I probably be able to fund a mold build and make some tips. |
Author: | Tom King [ Fri Jun 15, 2018 7:08 pm ] |
Post subject: | Re: New mast for the 21SE |
Can't a mold be pulled off of an intact one? |
Author: | kevinbatchelor [ Sat Jun 16, 2018 11:04 pm ] |
Post subject: | Re: New mast for the 21SE |
Probably, but I'm no Keen to take mine apart yet it might. |
Author: | Tom King [ Sun Jun 17, 2018 1:13 pm ] |
Post subject: | Re: New mast for the 21SE |
About half of them come out really easily. The others require a little heat to break down the epoxy, sort of like pulling a golf club head. |
Author: | jem135 [ Wed Jun 20, 2018 8:39 am ] |
Post subject: | Re: New mast for the 21SE |
I would prefer to have a solid mast.... no comp tip.... I bought one of the last comp tips available and after a few years it is already showing cracks along the connection line..... and they are no longer available like the masts.... Is there any talk back from Aquarius whether this mast deal is a go ??? I'm in for one of them... Jim Higgins Lake , MI Hobie21SE Hobie16 E Scow |
Author: | kevinbatchelor [ Wed Jun 20, 2018 8:16 pm ] |
Post subject: | Re: New mast for the 21SE |
You could try posting on their forums: http://owners.aquarius-sail.com/phpbb3/ Or email: E-Mail: [email protected] or [email protected] Telephone: 651-462-SAIL FAX: 651-462-7245 US Postal Service: Aquarius Sail Inc. 26568 Fallbrook Lane Wyoming, MN 55092 If you have comments or questions regarding our WWW service please send E-mail to [email protected]. |
Author: | kevinbatchelor [ Wed Jun 20, 2018 8:17 pm ] |
Post subject: | Re: New mast for the 21SE |
Sounds like they can't get aluminium mast extrusions http://owners.aquarius-sail.com/phpbb3/ ... ?f=5&t=984 |
Author: | kevinbatchelor [ Wed Jun 20, 2018 9:32 pm ] |
Post subject: | Re: New mast for the 21SE |
Maybe approach a mast maket directly http://ballengerspars.com/patslist2001-02.html |
Author: | Bwana_don [ Tue Jun 26, 2018 8:05 pm ] |
Post subject: | Re: New mast for the 21SE |
So far this thread seems to be for masts for the 21se, reading other threads it sounds like the 21sc mast would be the same extrusion, just a shorter length. If that is correct, expand out to the 21sc as well. Having just bought a 21SC, I would likely be interested in a mast as well, loss of a mast for whatever reason is my biggest fear. If I can be of help let me know, my mailing address is Wyoming, MN, live a couple of towns away, but that is our post office and it less than a 15 minute drive to Aquarius sails. Actually been wondering what it would take to get a group together to fund making the tooling and then turn it over to Hobie so they could make the masts again or provide it to supplier to make the mast. I agree, there is going to be more demand for the masts. Don |
Author: | kevinbatchelor [ Tue Jun 26, 2018 11:06 pm ] |
Post subject: | Re: New mast for the 21SE |
Their reply Kevin, The demand for Carbon masts has steadily increased over the years which directly effects the demand for aluminum extrusions. Unfortunately the aluminum extruder we have historically used changed ownership and is no longer interested in pushing the long extrusion lengths needed for masts. We are currently looking for an alternate source and hopefully can identify a suitable vendor in the near future. If you are interested in a mast extrusion please contact Tom @ 651-462-SAIL and he can provide you with estimated cost details, etc. |
Author: | tomis8 [ Thu Jul 12, 2018 8:19 pm ] |
Post subject: | Re: New mast for the 21SE |
I am purchasing a 92 21 SE this week. I would be interested in a solid alum. mast. I live in GA. Thanks. |
Author: | RacerEck [ Thu Jul 25, 2019 1:50 pm ] |
Post subject: | Re: New mast for the 21SE |
Bill, Have you already had the masts extruded? |
Page 2 of 3 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |