Return to Hobie.com
Hobie Forums
It is currently Fri Mar 29, 2024 8:23 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Apr 27, 2019 4:52 am 
Offline
Site Rank - Captain

Joined: Fri Oct 22, 2010 10:28 am
Posts: 89
Just picked up a 21se and plan to replace the rigging with a set from salty dog. I know this has been discussed many times over but I’d like to add shroud extenders to assist with righting.

I prefer the hyfield lever for ease of reconnecting the rig but they only extend about 3”, I don’t think that would be enough to allow for solo right even with a bag, am I wrong?

The Hobie extenders would do the trick but getting them reconnected on the water looks sketchy. I was thinking I could add some micro blocks and cleat to the shrouds to add tension while I reconnect. Has anyone ever tried this?

What are opinions on a mast bob? Logic assumes an extra 5lb at 33’ takes an additional ~165lbs to right, is this correct? I’ve read bill404 has a self inflating vest up top which sounds like a great solution.


Top
 Profile  
 
PostPosted: Sat Apr 27, 2019 7:38 am 
Offline
Site Rank - Old Salt

Joined: Mon May 09, 2005 10:25 am
Posts: 4176
Location: Jersey Shore
Maybe use both the hyfield and the hobie extension. Hyfield will make it easier to release the and re-tension to the final rig load. The hobie extension will give the length needed to assist with righting.

sm


Top
 Profile  
 
PostPosted: Sat Apr 27, 2019 10:15 am 
Offline
Site Rank - Old Salt

Joined: Sat May 02, 2009 5:22 am
Posts: 675
Location: Columbus, Indiana
I have used both for 30 years now.............. :shock:

_________________
Bill 404 21SE
Image


Top
 Profile  
 
PostPosted: Mon Apr 29, 2019 2:05 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 15027
Location: Oceanside, California
Yes, you need the extensions to get the length needed. The levers just allow you to re-tension the rig on the water.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)


Top
 Profile  
 
PostPosted: Wed May 01, 2019 9:57 am 
Offline
Site Rank - Captain

Joined: Fri Oct 22, 2010 10:28 am
Posts: 89
Thanks for the input guys.

I just ordered replacement shrouds and decided to just go with the shroud extenders. I plan to add a line to trap wire to to take slop out of rigging while I reconnect.


Top
 Profile  
 
PostPosted: Wed May 01, 2019 11:19 am 
Offline
Site Rank - Old Salt

Joined: Sat May 02, 2009 5:22 am
Posts: 675
Location: Columbus, Indiana
Don't forget that your new shrouds will need to be made shorter to allow for the extensions to work right.... :wink:

Your new shrouds should be made 8.25" shorter that the original length.

_________________
Bill 404 21SE
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group