| Hobie Forums http://www.hobie.com/forums/ |
|
| replacing rudder line http://www.hobie.com/forums/viewtopic.php?f=47&t=59563 |
Page 1 of 1 |
| Author: | summerbird [ Sun Nov 27, 2016 6:00 pm ] |
| Post subject: | replacing rudder line |
Does anyone have information how to get rudder line replacement and instructions on how to do it in a Mirage I9s? Thanks Mike |
|
| Author: | HStrech [ Mon Nov 28, 2016 11:55 am ] |
| Post subject: | Re: replacing rudder line |
We use spectra for the steering line, Installation can be tricky though. There's no kit offered for this. We also have a stainless line retro kit. Please start by contacting your dealer, and they should be able to steer you in the right direction. If the dealer has any questions, they can contact our Warranty department. |
|
| Author: | SteveLIBS [ Thu Jan 26, 2017 2:14 pm ] |
| Post subject: | Re: replacing rudder line |
Is the stainless line retro kit only for newer i9 models, or older i9 models as well? |
|
| Author: | Jbernier [ Thu Jan 26, 2017 5:03 pm ] |
| Post subject: | Re: replacing rudder line |
SteveLIBS wrote: Is the stainless line retro kit only for newer i9 models, or older i9 models as well? It is only for boats with a serial number that ends in 516 (anything with a 616 has already been changed) |
|
| Author: | mmiller [ Thu Jan 26, 2017 6:04 pm ] |
| Post subject: | Re: replacing rudder line |
And not for "older" models without a CT seat. The framed seats required a steering system with umbilical cord steering. The older boats with soft seats and steering mounted to the hull would not use the stainless either way. Simply the spectra cord. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|