Hobie Forums
http://www.hobie.com/forums/

Details of the i12s Inflatable: Part 1(of 3)
http://www.hobie.com/forums/viewtopic.php?f=47&t=7633
Page 1 of 1

Author:  Roadrunner [ Thu Aug 16, 2007 12:37 am ]
Post subject:  Details of the i12s Inflatable: Part 1(of 3)

Note: This is a three part article on the Hobie i12s inflatable. Part 1 is about portability -- unpacking and packing. Part 2 shows the boat's features: http://www.hobiecat.com/community/viewtopic.php?t=7650 . Part 3 talks about on the water performance: http://www.hobiecat.com/community/viewtopic.php?t=7654.

Part 1: How portable is it?

To be honest, I have never been a fan of inflatables. We've all observed the misadventures of so many -- the boats that never seem to inflate all the way, those that won't deflate, those that, when contacting the cooler water, look more like bananas than boats, and those that are little more than sails before the wind, leaving their owners with the firm resolution that inflatable boats are for the birds!

So when the opportunity came along to try out the i12s for a day, I wasn't really expecting much. I couldn't have been more wrong! So lets take a look at what came in the bag.

The invisible kayak: I was concerned with having someone steal the boat while running errands on the way home from picking the boat up from the Rep. Could it actually fit in the back seat of the truck?
Image

Yes, there's a 12' boat in there!
Image

These wheels are included:
Image

These wheels are optional:
Image

Putting on airs: Someone claimed that the boat could be inflated in 3 minutes. That was surely an exaggeration, so I decided to time it in the real world.

Laying the boat out:
Image

Inflating one of the 3 chambers:
Image

Voila! Three minutes, rock hard; no experience -- I was impressed!
Image

Details, details: Here's a close up of the nozzle:
Image

And the fit:
Image

For those allergic to exercise, there is a cool accessory:
Image

Inflation side:
Image

Deflation side:
Image

Packing it up: Now to see if it will actually fit back in that tiny container if you're not Houdini (or a packing engineer). If so, how long does it take?

Ready:
Image

Valves open
Image

Folding (note the seat is still in the boat):
Image

And once more (air is exiting as I fold -- no waiting):
Image

Placing bag on top:
Image

Stuffing the corners (just like that form fitting sheet):
Image

Flipping it over and connect the cross straps loosely. No heavy lifting required:
Image

Cinch it up:
Image

Done. 10 minutes including pictures. With practice I think it could be closer to 5. The bagged boat (including wet seat) weighed in at 63lb. on my scale. I would estimate the bag at about 5 lb +/-.
Image

Here's the optional matching accessory bag. It contains drive, paddle and both pumps. I forgot the wheels, but wold have put them in the big bag, where they were originally.
Image


That's it for part 1. Sorry for the plethora of pics, but some people like all the details. 8)

Author:  sunjammers [ Thu Aug 16, 2007 6:19 am ]
Post subject: 

keep them comming!

Author:  Apalach [ Thu Aug 23, 2007 8:09 pm ]
Post subject: 

Hey RR,
Great review! Like you, I was not expecting a whole lot, but I can see some excellent potential for additional ways to get into trouble with a yak!

Author:  xavier [ Thu Aug 23, 2007 9:18 pm ]
Post subject: 

So let's get to the bottom line: how much and when :P ?!

Author:  windlass [ Sat Jul 17, 2010 10:25 am ]
Post subject:  Re: Details of the i12s Inflatable: Part 1(of 3)

thanx for posting entire review...the folding and bagging part was especially useful. windlass aka judy

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/