Hobie Forums

Click-n-Go with older drive causes lever release
Page 1 of 1

Author:  mmiller [ Tue Jun 23, 2009 10:37 am ]
Post subject:  Click-n-Go with older drive causes lever release

It is a potential problem to use an older drive in a newer Click-n-Go hull.

Problem: The drum shaft in an older drive can rotate within the drive. The levers pinch the shaft and as the drive rocks... This can "ratchet" open the Click-n-Go lever and release the drive.

The newer drives for the Click-n-Go lever system have splines to prevent this rotation.


The shaft is easy to replace. Simply hammer out the old shaft with the new one.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group