If you have this style:
You remove the split ring and the washer under it.
If you have this style:
You remove the split pin.
| Hobie Forums http://www.hobie.com/forums/ |
|
| AI Seat Peg Removal http://www.hobie.com/forums/viewtopic.php?f=69&t=43753 |
Page 1 of 1 |
| Author: | LarryJ [ Sun Jul 08, 2012 3:42 pm ] |
| Post subject: | AI Seat Peg Removal |
How does one remove the seat pegs from a 2011 AI seat to break the seat into two parts. They're not like the older expanding type. I've tried turning the bottom part of the peg that inserts into the boat, but they don't budge. Are they one piece. Thanks. |
|
| Author: | Herbaldew [ Mon Jul 09, 2012 8:08 am ] |
| Post subject: | Re: AI Seat Peg Removal |
If you have this style: You remove the split ring and the washer under it. If you have this style: You remove the split pin. |
|
| Author: | LarryJ [ Mon Jul 09, 2012 9:32 am ] |
| Post subject: | Re: AI Seat Peg Removal |
Thanks. Ihave the lower style. I'll knock the pin out |
|
| Author: | Kal-P-Dal [ Tue Jul 10, 2012 6:35 am ] |
| Post subject: | Re: AI Seat Peg Removal |
You can press the pin out, easier than knock. br thomas |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|