plfinch wrote:
All these Tandem Island improvement ideas are interesting but, honestly, the two most important changes I would like to see are also two that will not happen:
1. An integrated or optional outboard motor rear-side-mount that is Hobie-approved for up to 3HP equivalent (like Torqeedo or ePropulsion electric outboards).
2. Redesigned/reinforced hull bottom such that tubular (PVC or other) trailers of a specified length, diameter, and spacing are approved for upright transport and storage. Would require redesign of the seat drains and possibly scuppers. The hull bottom shape is already a very close match for properly spaced 3" diameter bunks, not that much change would be needed. Maybe a slight decrease in rocker and some reshaping.
Peter
These are the top two things I want to see as well. Motor mount, and improved transport options that use a parallel design (pvc bunk style) for both trailers and carts. The biggest pain for me is transport and launch, the cradles are not a good option imo, I also don't understand the scupper cart since it's a struggle to engage unless you tilt the boat on its side which is impossible with the outriggers on.