| Hobie Forums http://www.hobie.com/forums/ |
|
| Outboard Motor / Hobie TI Application Guide & 403 Comparison http://www.hobie.com/forums/viewtopic.php?f=71&t=61256 |
Page 10 of 10 |
| Author: | taberahkj [ Fri Jul 28, 2023 11:16 am ] |
| Post subject: | Re: Outboard Motor / Hobie TI Application Guide & 403 Compar |
taberahkj wrote: pro10is, how did you get the 3/16" bar stock in the gear track? I just ordered some to build my mount and it's too thick to fit in the Yakattack gt90 track as it hits the screw heads. Hopefully I can grind it down until it fits. 5 Minutes with a flap disc and my stainless bar stock is now the right thickness. For anyone trying this in the future, 1/8" Stainless bar stock is a perfect fit. |
|
| Author: | KeithB [ Tue Aug 01, 2023 12:15 pm ] |
| Post subject: | Re: Outboard Motor / Hobie TI Application Guide & 403 Compar |
Excellent write up. Lots of info. Wondering how the island hopper compares? https://www.islandhopperoutboards.com/r ... YsEALw_wcB |
|
| Author: | pro10is [ Sun Aug 06, 2023 6:25 am ] |
| Post subject: | Re: Outboard Motor / Hobie TI Application Guide & 403 Compar |
KeithB wrote: Excellent write up. Lots of info. Wondering how the island hopper compares? https://www.islandhopperoutboards.com/r ... YsEALw_wcB i haveno data on this motor |
|
| Author: | powersjr2 [ Thu Oct 19, 2023 8:39 pm ] |
| Post subject: | Re: Outboard Motor / Hobie TI Application Guide & 403 Compar |
A bit more on electric motors.... A new leader? https://youtu.be/1Ac3-yPOF9k?si=Pd7SMVA7qvqCNeIU |
|
| Page 10 of 10 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|