Looks the same. New is about 1 1/2" taller. Top to bottom this part is: Old is about 1 3/4" New is about 3 1/4"
| Hobie Forums http://www.hobie.com/forums/ |
|
| Mast tip rotaror issue.... http://www.hobie.com/forums/viewtopic.php?f=71&t=61655 |
Page 2 of 2 |
| Author: | Husse0416 [ Wed Nov 29, 2017 6:10 pm ] |
| Post subject: | Re: Mast tip rotaror issue.... |
mmiller wrote: 79503121 BASE - SPINNAKER MAST ROTATOR ($5.00 / USD USA 11-2017) Will be on all new kits soon. Geat news Matt! Any pics of this new device? Can it be ordered from Hobie Europe? This might save me some work on making my own extension. I just got the Carbon tubes delivered but I have another good use for theese if I can solve the batten issue with your upgrade. All the best/ Gustav |
|
| Author: | tonystott [ Sat Dec 02, 2017 2:44 am ] |
| Post subject: | Re: Mast tip rotaror issue.... |
and me. Just picked up my new aka retention set and furling line jigger (technical term) |
|
| Author: | vetgam [ Fri Dec 15, 2017 10:48 am ] |
| Post subject: | Re: Mast tip rotaror issue.... |
Matt, I ordered the mast extender base on the part number you listed. It came in today but it was nothing more than the old spinnaker mast topper. The distributor double checked the order number and it matched the part number you listed.. Can you double check that part number and let us know if there is an error. What should the extender look like? Maybe there is just a suttle difference in cup size/height? Greg |
|
| Author: | vetgam [ Sat Dec 16, 2017 8:05 am ] |
| Post subject: | Re: Mast tip rotaror issue.... |
Matt I compared parts. The mast rotater I got was exactly the same as the old rotater. Hobie must still be shipping the old mast rotaters out when you try to order the new one. Matt, should we use a different part than the one you gave us? |
|
| Author: | vetgam [ Fri Dec 22, 2017 6:45 am ] |
| Post subject: | Re: Mast tip rotaror issue.... |
Matt Miller, did you see my posts about the part number? |
|
| Author: | mmiller [ Fri Dec 22, 2017 10:25 am ] |
| Post subject: | Re: Mast tip rotaror issue.... |
It is certainly possible they have mixed the stock. This is a new SKU, so odd. Have your dealer contact our parts department again. |
|
| Author: | Husse0416 [ Fri Dec 22, 2017 2:03 pm ] |
| Post subject: | Re: Mast tip rotaror issue.... |
mmiller wrote: It is certainly possible they have mixed the stock. This is a new SKU, so odd. Have your dealer contact our parts department again. Hello Matt! Any pics available on the new mast tip rotator? I have some dificulties to understand what has been changed in the new kit. |
|
| Author: | mmiller [ Fri Dec 22, 2017 2:27 pm ] |
| Post subject: | Re: Mast tip rotaror issue.... |
Looks the same. New is about 1 1/2" taller. Top to bottom this part is: Old is about 1 3/4" New is about 3 1/4"
|
|
| Author: | Husse0416 [ Fri Dec 22, 2017 2:39 pm ] |
| Post subject: | Re: Mast tip rotaror issue.... |
mmiller wrote: Looks the same. Is a few inches taller. Thanks Matt! Nice to see the fix! Good work!  /Gustav |
|
| Author: | vetgam [ Fri Dec 22, 2017 3:33 pm ] |
| Post subject: | Re: Mast tip rotaror issue.... |
Thanks Matt. Yes there must have been a mixup. This is not what they sent me. Nice fix. |
|
| Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|