Return to Hobie.com
Hobie Forums
It is currently Fri Nov 16, 2018 6:16 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Mar 12, 2018 12:18 pm 
Offline
Site Rank - Captain

Joined: Mon Nov 02, 2015 9:59 am
Posts: 99
I received my free kits hook/hinge/spring replacement for Hobie Island AKA.
I thought this would take 2 hours, ended up wasting the whole day.

The 4 tiny screws holding each AKA bar seize up, they won't move. The result were 7 broken screw heads. Drill this this SS out was impossible without a drill press. I tried hand drill >>> failed.

Now All my AKA bars has 3 screws and and bunch of glue to hole the rest.

_________________
Sale: 12Ah/15Ah Lithium Battery
http://www.norcalkayakanglers.com/index ... #msg959037


Top
 Profile  
 
PostPosted: Mon Mar 12, 2018 3:09 pm 
Offline
Site Admin

Joined: Tue May 27, 2003 12:44 pm
Posts: 12535
Location: Oceanside, California
There has been a lot of discussion about this recently. Heat is the answer.

https://www.hobie.com/forums/viewtopic.php?f=70&t=62288

Airsails wrote:
Just finished the upgrade on my 2011 Tandem Islander.
Removing the AKA knuckle lock plates can be difficult and result in broken screws, here is how I got mine out.
All mine were seized, this method removed them with no sheared heads or damaged threads.
First you remove the plastic lock plates with a pair of side cutters and pliers, they break off fairly easily.
Next, using a heat gun, heat each screw head in turn. They need to be really hot, I measured the temp using a laser thermometer and got a max reading of 350 degrees C. Takes up to a minute with the heat gun 2 cm from the screw head to get them this hot.
Now while hot, use a screwdriver to wiggle the head back and forth, shouldn't take much effort to remove them, if the screw is still tight, heat it more. My screws took on a brown tinge when they got hot enough. You won't damage the metal parts with the heat gun, it isn't hot enough for that.
I applied grease to the threads when the screws went back in to help stop corrosion.
Having a 6-32 UNC tap to clean the threads out helps when reinstalling the screws.

_________________
Matt Miller
Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group