|Wilderness Systems Heavy Duty Kayak Cart for TI?
|Page 1 of 1|
|Author:||Da Tinker [ Thu Jun 06, 2019 6:51 am ]|
|Post subject:||Wilderness Systems Heavy Duty Kayak Cart for TI?|
So, how about this to roll a TI modest distances?
https://www.wildernesssystems.com/us/pr ... ach-wheels
It may need to have the load bars padded out/extended with PVC, but 32" should support a TI well. And it should be far easier to mount, as you do not have vertical bars to stab into the scupper holes.
|Author:||mmiller [ Thu Jun 06, 2019 8:04 am ]|
|Post subject:||Re: Wilderness Systems Heavy Duty Kayak Cart for TI?|
My experience with strap-on carts is that they are a pain in the as..
You have to lift the kayak onto them and they tend to slip or get miss-aligned while in use.
If you can swing it... by far the best cart for the islands is the dolly with beach wheels. Easy to load (lower frame) and easy to haul.
And... easy to wheel the cart along by itself (back to the car) due to the handle. The handle also keeps it upright for loading.
80046200 HOBIE DOLLY, AI/TI BEACH-TIRE
A dolly is the best option for transporting larger, heavier models such as Pro Anglers and Islands, or transporting kayaks loaded with gear. The dolly is available in two styles (Tuff Tires or Beach Wheels). The universal model will fit a wide variety of Hobie Kayaks including Pro Anglers, the Outback, and Oasis.
Hull pad protects the hull of your boat, providing padded support.
Hull & Ama cradle built-in
Pull handle simplifies the loading process and acts as a kickstand for keeping the cradle upright
|Page 1 of 1||All times are UTC - 8 hours [ DST ]|
|Powered by phpBB® Forum Software © phpBB Group