Hobie Forums http://www.hobie.com/forums/ |
|
New Rudder up / down lines available http://www.hobie.com/forums/viewtopic.php?f=71&t=8188 |
Page 3 of 3 |
Author: | Joseph Thompson [ Sat Apr 05, 2008 12:41 pm ] |
Post subject: | |
In Step 7 of the 2007 AI up/down line system kit (kit #81391002), the directions call for replacing the original up/down control lines and guides that exit the hull and attach to the rudder assembly with "new tubes and lines that are in this kit". However, my kit only includes the two short straw-like rigid tubes that are to be used in step 17, and no other tubes or exit guides. And only "lines" in my kit were the 2 long black "scrunchie" cord-assemblies. I'm pretty sure I have been shorted the two thin grey up/down control lines that attach to the rudder assembly (and the associated guide tubes)...or am I mis-reading the directions? Could someone confirm that I'm short a few parts, or tell me how I'm mis-reading the instructions. Thx, Joe |
Author: | stringy [ Sat Apr 05, 2008 2:17 pm ] |
Post subject: | |
Joe, I have installed 2 kits now and both came with coiled plastic tubes fitted with the grey spectra lines for the stern. Looks like you have been given an incomplete kit. Was the plastic bag sealed? |
Author: | Joseph Thompson [ Sat Apr 05, 2008 5:42 pm ] |
Post subject: | |
Yes, sealed. I'll give my dealer a ring, and all will be well, I'm sure. After lots of head-scratching, just glad to hear the phantom parts are indeed what's missing, and not my reading comprehension. Thx, J |
Author: | KayakingBob [ Sun Apr 06, 2008 8:31 am ] |
Post subject: | |
There are two different kits, one for the 2007, and one for the earlier hulls. The difference seems to be if 2 tubes, or 4 are included in the kit. I think the idea was that the later boats already had the newer tubing on the rudder turning lines. Kayaking Bob |
Page 3 of 3 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |