Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 8:33 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject:
PostPosted: Fri Feb 15, 2008 12:18 am 
Offline
Hobie Approved Guru

Joined: Sat Nov 12, 2005 10:46 pm
Posts: 3017
Location: Escondido
Stringy, congratulations on your new AI!

The Adventure/AI seems to ride right side up without any problems. It helps to have large saddles mounted where they support the hull well.

Your choice depends on the type of vehicle you use. In my application it is easiest to load from the rear. For that I use Thule #875 "Hydroglide" saddles in the rear to slide the boat on and #878 "Set to Go" rubber saddles in the front to grip. They look like this:

Image

Image


There are some I do NOT recommend: Thule "Top Deck" -- the smaller pads don't support the hull as well; roller systems -- they put too much pressure on one point and really dent the hull; Yakima bars -- the round bars make it difficult or impossible to keep your saddles from rotating out of position like this:

Image

BTW, since your boat probably sits on wheels all day, have you tried the tennis balls with your cart to keep the hull from denting? Works well with the AI, but needs extenders on deeper hulls like the Oasis outfitter, etc. to insure the cart extends all the way through the scuppers. 8)

Image


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 15, 2008 8:10 am 
Offline
Site Rank - Old Salt

Joined: Fri Jul 07, 2006 9:40 am
Posts: 952
Location: Dallas, TX
Hey Roadrunner...

Refresh my memory. What are you using for the cart extensions? It looks like PVC pipe. Schedule 40?

Brian C


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 15, 2008 9:36 am 
Offline
Hobie Approved Guru

Joined: Sat Nov 12, 2005 10:46 pm
Posts: 3017
Location: Escondido
Yes, the sked. 40 inside and slip/thread couplers (beveled) on top. I've been real happy with it. Here's a link to the project:
http://www.hobiecat.com/community/viewt ... art+tennis 8)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Feb 15, 2008 10:54 am 
Offline
Site Rank - Old Salt

Joined: Fri Jul 07, 2006 9:40 am
Posts: 952
Location: Dallas, TX
There it is... I just didn't go back far enough in the archives, though I was probably looking in this section.

Thanks,
Brian C


Top
 Profile  
 
 Post subject:
PostPosted: Sat Feb 16, 2008 12:32 am 
Offline
Site Rank - Old Salt

Joined: Thu Aug 16, 2007 2:25 pm
Posts: 2863
Location: Central Coast NSW Australia
Roadrunner wrote:
BTW, since your boat probably sits on wheels all day, have you tried the tennis balls with your cart to keep the hull from denting?

G'Day Roadrunner,
I have been using your tennis balls idea since reading your original post. They work great, thanks, and thanks too for the rack pad info -very useful. 8)
I bought a small trailer today and I am looking at ways to cradle the AI. It should make it easier to get it to the water so I can get there more often! :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 35 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group